What drive letter did you assign? What other drive letters are assigned to which devices?
Printable View
What drive letter did you assign? What other drive letters are assigned to which devices?
c: ntfs drive Ide 37gig
f: fat flash drive 16 gig
d: ntfs ide 80 gig
g ntfs sata 200 gig
Now that this thread has gone a couple days and still no fix I'll offer my probably bad advice:
This site discusses a very similar issue:
http://www.softwaretipsandtricks.com...ve-letter.html
and thus refers to this:
http://www.duplexsecure.com/en/faq
which says to do this:
"A: If your system has some problems with SPTD installation you can do as follows:
If your system is already running then go to step 2 directly. Otherwise start from step 1.
Step 1. Boot in safe mode and press ESC key when you see on bottom line of display: "Press ESC to cancel loading SPTD.sys". This will abort loading of SPTD layer.
Step 2. Find "HKEY_LOCAL_MACHINE\System\CurrentControlSet\ Services\sptd" registry key in REGEDIT and set DWORD Start value to 4 (i.e. disabled).
Step 3. Reboot again in normal mode and check if your issue is solved.
To reenable SPTD restore the DWORD Start value back to '0' and reboot your computer."
NOTE: In my comp I have CurrentControlSet0001, 0002 and 0003 BUT use 0001 if you have that.
Note: In my comp the DWord Start value is set at 0 now - check your BEFORE you change it.
Note: Never hurts to set a restore point BEFORE messing in the registry.
gl
You have a 16GB flash drive?
Certainly is a good week for strangeness! I don't suppose you've used any software to repartition the drive, create hidden partitions or the like? I know Corsair supplies this on their 16 GB drives. I've also seen a couple of reviews that suggest OCZ 16 GB drives may exhibit some strange performance issues (mostly slow transfers).