Welcome to Windrivers shob4all
What you quote is actually the chipset... where did the board come from... a Dell, Packard-Bell, HP Pavilion or something and what model number was the computer?
Printable View
Welcome to Windrivers shob4all
What you quote is actually the chipset... where did the board come from... a Dell, Packard-Bell, HP Pavilion or something and what model number was the computer?
Thank you so much for the warm welcome NooNoo, you asked:Where did the board come from and the model no. of computer.
I really don't know, i tell you i have a branded computer, which has msi motherboard(Intel 915g) , i opened up the cabinet and found philips card attached on the pci slot and took down the model no. which is philipsfm1216me/h3
presicely it looked something like this.
"Phillips
3139 147 18201H#
FM1216ME / I H-3
SV20 0433"
Is that helpful if not , please let me know how to find out the board?
So what brand computer was the philips card in?
It is "ESYS"
OK, and Esys make computers for other people to distribute... where did you buy this computer?
NooNoo, please let me know if you need any other information on the same as i know it is very important to know all the things as i too have worked in aol uk broadband tech support, i am quite good with computers it is just that non availability of this driver has made me crazy.
I don't know whether you heard of ESYS or not but it is a very good brand which is not availble accross the globe
And thanks a ton for researching on this concern!!
Actually there is a retail outlet for ESYS, i bought this computer from there.
that outlet is owned by ESYS
Right and which town was that?
Well NooNoo, i can see you are located in U.k , i am sitting thousands of miles away from you in New Delhi, India. Different country altogather. I purchased the system from New Delhi.
Right, so does the vendor have a website... I have found stuff all over the world including releases for STP 070901 which includes a TV tuner card... getting closer.
yeah, it is esys.co.in, however i have gone thru this website and did not find the relevant information. Moreover my 3 year warranty is over now on august 2008
Have you emailed them and asked them to send the driver?
That's good to know, NooNoo!!, i am sure my issue is in safe hands.
oooh forgot to ask... on the card is an FCCid - post anything with FCC next to it!
No, i did not to be quiet honest, but i don't think they will send the drivers, moreover i do not have a email address for the concerned department.
when i was in aol tech support, we were not allowed to send drivers and all thru email. but i am not sure.....
Right, NooNoo, since i am at work rit now not in front of my system, i will surely send the FCCID tomorrow. Alright??
Please let me know what time you come online??
Don't make that assumption. Esys have no online support, and you use the drop down box to route it to service and support. Many companies will email you drivers. AOL is not a good role model.Quote:
Originally Posted by shob4all
Okay, i will better check it out on esys website and also the fccid
In the meanwhile try this driver ECS tend to use reference drivers, so it is likely that it would work.
i will surely check this ecs driver having reached home, Thanks alot for all your help.
Hi NooNoo,
going by your advice i sent my system to esys and now it is back and in device manager under sounds..etc, it is coming as winfast pvr 2000 wdm etc., which is properly installed, which means that it is winfast t.v tuner card, is that correct?? , Secondly, now i want to tell you that i am using mce to view t.v however picture quality is very bad and it is only picking up 20 channels for somereason. Do you have any suggestions?
Yes Winfast is a standard make.
Try retuning it, or checking your aerial?
Hi !every body!
Could you help me please....
I got the same problem as this guy also...
But my card is differnt one later "3139 147 18201A#"
And I had tried this"[url=http://www.hauppauge.com/pages/support/support_pvr250-350.html]" too,But after i downlaod "HcwDriverInstall.exe" it dosent work.
It only shown like this "drivers have NOT been updated.Compatible hardware not found.<<click to exit>>."
Here I got some photo also.....Attachment 175
Attachment 176
Attachment 177
.
try this then
If not can I have a pic of the rear of the card and there appears to be a label on the front of the top of the card which is cut off in the pic.
Hi.NooNoo!
It still doesn't work.....
Here is the pic
Did you mean these?
Thank for help!
Well there you go, you have an ASUS card with an HP part number!
So this came out of an HP computer... like this one This says update, but may be the whole driver. If you can tell me which HP it came from, I can get the exact driver.
Edit: found the original driverhere
I'm sorry.I don't know which HP did it come from.
cos I bought it with a guy who bring from china....
But i know it just come separately.not inside of the computer.
Well it is an HP part, if the HP drivers don't work, then it is possible the card is faulty.
OK!
Than I will try to contact the guy that I bought the card to get more information....
But I don't think the card is faulty...cos it look 100% new....
Anyways thank you for your help,NooNoo!
What happens when you try and install the HP drivers?
you mean this one "sp34979.exe"?
after I install it display like this "Your system does not meet the minimum requiements for this update.Update has beem cancelled.(9995)
for this one "tv7131-1325.exe"
not things happen when i install it.
it still doesn't work.....
I also try this one"sp26598.exe"
after I install it display like this:
"Please press YES to proceed with the update."
after I press "YES" it display a massage like this:
"The update did not complete successfully.
Error Number:9"
I just got more information from the guy I bought the card,
He says he just buy the HP products separately from china for many parts differently.
And he just assambly them in cambodia. that what we called "clone computer" in cambodia.
I just bought the card from him.and he does't have the cd driver too...
you see what i mean?
And I found this on the empty case of (HP) "HP pavilion"
best regard/young man
Are you running sp2 or sp3? If not, you need to
mine is sp2.
yes it work with this one..........
thank you so much NooNoo for all help.
but i still have one problem with the application.
you have any good suggestions for the application to run it with
this remote:
Model:XPC-RCO1
Rating:5V---10mA
This Device Complies With Part 15 of The FCC Rules
(this remote is come with the card)
You are using Windows Media Center?
If not there is always virtual dub.
hi guys am new here and if my post does not belong here plz redirect me ,
amd just having a problem with an old tv card, my brother gave me his old tv card and he doesnt know where he put the driver for it , he has the driver installed on his pc but i need it for mine
the card has a sticker on it that says "super digital video dazzle series" marked on pal
if anyone can help i would really appreciate it
http://www.bttv-gallery.de/high/test...e_fm7130_a.jpg