Printable View
you can email it to me at that addy or margaret at south-burnett dot com ..
one other way is that you can post the image link without formatting it
if you just post the photobucket image address in the post it will act as a link and not display the whole picture. Members can then click the link to view the image
like http://www.rejectz.com/allkids.jpg .. :) thats my tribe on holiday travelling through the world famous daintree rainforest..
but you see it comes up as a link not an image.
This is from Biker Chick
These are the things that I found out about RealTek in my system. Look at last line in this document. I do have the Volume Control Back now. That is what CCT helped me get back on my system. Don't have a clue how that got off my machine. Please, Please help me with posting this or give me your input. I need guidance in geting this corrected.
COMPONENTS
Sound Device
Name Realtek AC97 Audio
Manufacturer Realtek
Status OK
PNP Device ID PCI\VEN_8086&DEV_24C5&SUBSYS_2010107B&REV_02\3&267 A616A&0&FD
I/O Port 0x0000E400-0x0000E4FF
I/O Port 0x0000E080-0x0000E0BF
Memory Address 0xFFA7F800-0xFFA7F9FF
Memory Address 0xFFA7F400-0xFFA7F4FF
IRQ Channel IRQ 17
Driver c:\windows\system32\drivers\alcxwdm.sys(5.10.5440, 587.01 KB (601,100 bytes), 7/3/2007 2:01 PM
Hardware resources.......I/0
0x0000E400-0x0000E4FF Realtek AC97 Audio OK
0x0000E080-0x0000E0BF Realtek AC97 Audio OK
[U] Kernel Driver Yes Manual Running OK Normal No Yes
alcxwdm Service for Realtek AC97 Audio (WDM) c:\windows\system32\drivers\alcxwdm
SOFTWARE ENVIROMENT
System Driver
NAME DESCRIPTION FILE TYPE
aeaudio aeaudio c:\windows\system32\drivers\aeaudio.sys Kernel Driver No
STARTED START MODE STATE ERROR CTRL ACCEPT PAUSE AC
Manual Stopped OK Normal No No
aec Microsoft Kernel Acoustic Echo Canceller c:\windows\system32\drivers\aec.sys
Kernel Driver No Manual Stopped OK Normal No No
alcxsens Service for WDM 3D Audio Driver c:\windows\system32\drivers\alcxsens.sys
.sys
Kernel Driver Yes Manual Running OK Normal No Yes
audstub Audio Stub Driver c:\windows\system32\drivers\audstub.sys
Kernel Driver Yes Manual Running OK Normal No Yes
dmusic Microsoft Kernel DLS Syntheiszer
c:\windows\system32\drivers\dmusic.sys
Kernel Driver No Manual Stopped OK Normal No No
drmkaud Microsoft Kernel DRM Audio Descrambler
c:\windows\system32\drivers\drmkaud.sys
Kernel Driver No Manual Stopped OK Normal No No
ftdisk Volume Manager Driver
c:\windows\system32\drivers\ftdisk.sys Kernel Driver Yes
Boot Running OK Normal No Yes
kmixer Microsoft Kernel Wave Audio Mixer
c:\windows\system32\drivers\kmixer.sys
Kernel Driver No Manual Stopped OK Normal No No
splitter Microsoft Kernel Audio Splitter
c:\windows\system32\drivers\splitter.sys
Kernel Driver No Manual Stopped OK Normal No No
swmidi Microsoft Kernel GS Wavetable Synthesizer
c:\windows\system32\drivers\swmidi.sys
Kernel Driver No Manual Stopped
OK Normal No No
swmidi Microsoft Kernel GS Wavetable Synthesizer
c:\windows\system32\drivers\swmidi.sys
Kernel Driver No Manual Stopped OK Normal No No
wdmaud Microsoft WINMM WDM Audio Compatibility Driver
c:\windows\system32\drivers\wdmaud.sys Kernel Driver No
Manual Stopped OK Normal No No
SOFTWARE ENVIROMENT
Signed Drivers
SIGNED DEVICE CLASS DRIVER DATE
Realtek AC97 Audio Yes MEDIA 5.10.0.5440 1/9/2004
MANUFACT. INF NAME DRIVER NAME [U]DEVICE ID
Realtek oem0.inf ALCXWDM.SYS PCI\VEN_8086&DEV_24C5
&SUBSYS_2010107B&REV_02\3&267A616A&0&FD
Volume Manager Yes SYSTEM 5.1.2600.0 7/1/2001
(Standard system devices) machine.inf Not Available
ROOT\FTDISK\0000
You did the posted my info so quick. That is exactly the way I have tried and tried to do. I just can't seem to get it. Do you think I should start another post or continue with this one????
continue with this one..
what you posted was able to be posted with cut and paste or copy and paste.
You drag your mouse over the test you want copied and then right click your mouse over it. A menu will popup and you scroll down to copy and left click
then you go to where you want to paste it, in this case the windrivers post and right click your mouse and scroll down to paste and left click. after a second your text should appear..sometimes some forums limit post sizes so you may find it doesnt accept the full text. in that case try half on one post, and then do another post and paste the rest
Your going great guns
the way to learn is by fixing things.. you learn so much more than if everything ran smoothly..
Are you saying this is all that I have to do with the copy and paste.
This was do simple. Everything below I copied and pasted it.
what you posted was able to be posted with cut and paste or copy and paste.
You drag your mouse over the text you want copied and then right click your mouse over it. A menu will popup and you scroll down to copy and left click
then you go to where you want to paste it, in this case the windrivers post and right click your mouse and scroll down to paste and left click. after a second your text should appear..sometimes some forums limit post sizes so you may find it doesnt accept the full text. in that case try half on one post, and then do another post and paste the rest
HiQuote:
Originally Posted by Mayet
Is there no one here who is going to try to help me with this. I've noticed in this report that alot of the audio things are STOPPED. How do I get them back on Automatic? Or are these stopped becuse in the last 3 lines it says (Standard system devices) machine .inf Not Available?? If this (inf) is part of Windows, how can it recover it.
Firstly can you go to start run and type scf /scannow thats sfc space forwardslash scannow
that will restore any missing DLL's and system files before we go any further
and then can you go to windows updates and do all your available updates and check if there is any driver updates available for your system.. download them
and reboot
then can you check in Device Manager, System Devices that Plug and Play Software Device Enumerator is installed and running?
If not follow this below
search for machine.inf then copy to temp directory. remove
at about line 20 " ExcludeFromSelect=* "
goto control panel, add new hardware, next (let it seach), yes hardware
is connected, next, scroll to bottom, add new hardware device, next,
install from list, next, select system devices, next, select have disk,
point to amended copy of machine.inf in temp directory, scroll to "plug
and play software device emulator" in right hand column, next and
complete install.
From Here
Mayet
I've already tried, before I contacted this group, to run the scannow. The system will not let me do that. Reason being, I guese, is my restore CD is for SP1 dnd I have updated this system to SP2 with no restore for SP2. When I try to run the scannow, my computer will stop and tell me to put in the restore CD, and when I do, it will not accept it. Says wrong disk, then my machine hangs up and I just have to turn off without shuting down.
Mentally I'm shot; right now I'm not able to do anything else on this computer I will try looking at your other suggestion tomorrow. Also, I have all the updates from Microsoft. I have been to site and checked to see if I needed and driver updates.
Hi Mayet
I don't really know how to tell if the Plug & Play Software Device Enumerator is installed and running or not. I looked at it and checked Properties. I did not see anything to make me think it is not running. You will have to tell me what to look for.
You can check Plug and Play:
Start>Control Panel>Administrative Tools>Services and look for 'Plug and Play' - should be set for Automatic.
Start>Control Panel>System>Device Manager>System devices and RIGHT click Plug and Play Software Devioce Enumerator and click properties and it should say 'this device is working properly'.
:)
BTW: This site is where I would NORMALLY suggest you get your downloads:
http://www.emachines.com/support/pro...es&model=T2862
That's the computer you said you had in post 3. However, it seems they don't have any support.
You do have access to the User manual which outlines how to use your restore cd to recover the system and drivers. At this point, since you have copied off the good stuff, I would suggest that tack.
If you want to continue trying to 'save' the situation, you were directed to Intel drivers earlier on that might do it- just need to try I guess.
gl anyway - :)
Yes my Plug and Play is running and on Automatic.Quote:
Originally Posted by CCT
I have looked in the Windows Explorer (mind you I did not delete anything) just put my cursor on top of things looking at the things that showed for Realtek. I tried alot of the web sites you guys have suggested for downloading BEFORE I CONTACTED THIS FORUM. I think I downloaded things that I did not need to and also things that I did. Now I have stuff in my System 32 and other places for Realtek that has been installed on different dates. I was just downloading everything in sight, NOT KNOWING WHAT I WAS DOING. Do you think I ought to go into the system and delete anything that has Realtek on it and then try to reinstall??? MAYBE FROM MY RESTORE CD instead of going to sites. Do you think that all these different versions that I have attemped to download are what is causing the Blue Screen???? I don't know anything about working with FILES IN SYSTEM but when I put my cursor on top of the file and then click Properties I would know if it was Realtek or not. I have all My Documents and Web sites, to things I have on my desktop, saved to an External Hard Drive. So if this computer crashes I will have saved all my Pictures and Music on the External Hardrive. I wanted to make sure of that before I started messing to much with this thing. The only thing I don't have on external H D is my favorites and not sure about how to do that. I would like an opinion from any or all that would answer as to your opinion of what to do. My neighbor's grandson, (they said) is very knowledgable about computer, maybe I could get him to look at this computer. He works on their computer. I REALLY DO APPRECIATE ALL OF YOU TRYING TO HELP ME SOLVE THIS PROBLEM. BE HONEST WITH ME AND ADVISE IF I SHOULD SEEK OUTSIDE HELP WITH MY PROBLEM. OR ARE YOU GUYS STILL WILLING TO TAKE YOUR VALUABLE TIME TO CONTINUE TO HELP "ME" FIX THIS. I'M REALLY GETING DEPRESSED WITH NOT GETING THIS TO WORK. ALL OPINIONS ARE WELCOME.
I/we need to know just how bad things are:
Click Start, Control Panel, Add/remove Programs:
What programs are shown that involve audio?
eg: if Realtek drivers are installed there should be an entry like 'RealTek High definition Audio Driver'.
Be sure to look for ALL audio entries.
Click Start, Control Panel, System, Hardware, Device Manager, Sound Video and Game Controllers and report all entries EXACTLY with the word 'Audio' in them.
With that info we might be able to clean up your sound stuff.
Like Mayet implied, you may have other issues with your install since you did lose that Sound Volume control earlier.
:)
CCT
I do not have anything in my ADD/REMOVE that indicates audio except my Media Player no RealTek AC '97.
Device Manager
Sound Video and Game Controllers
Audio Codecs
Legacy Audio Drivers
Legacy Video Capture Devices
Media Control Devices
Realtek AC97 Audio
Video Codecs
Ok
First: Create a new folder by Right clicking on your Desktop screen, left click new, then folder, then name the folder AC97.
Then go to this site Noo Noo gave you and download the audio driver to that folder.
http://downloadcenter.intel.com/Deta...ition&lang=eng
Have a look inside and make sure there is an 'inf' file in there.
Then , go back into Device Manager, Sound Video and Audio Controllers and Right click on the 'Realtek AC97 Audio' entry, then left click on properties, left click on driver, left click on uninstall and click 'OK'.
Called away - anyway, at this point reboot and see what happens.
If asked for a driver, direct the search to the desktop folder. (in most cases, that means every time Windows asks you to let it go ahead and do something, you say no and take the harder road)
OK CTTQuote:
Originally Posted by CCT
I went to the site, and I messed up; I guese. I clicked Run not SAVE and it did not ask me where I wanted to send it. It just started downloading. I don't think it made much difference though. I still don't have the driver. Then I went back to site and downloaded and did not run did a save and I saved it to the file I had made on desktop (AC97). I still cannot look for an inf file because all you can see when you open is an Install Shield to install.
Sorry I don't know what else to do. I think I'm up S--- Creek Without a Paddle