Several errors in XP

Ok, the 512mb stick is no longer in, but I still got a BSoD, here it is:

A wait operation, attach process, or yield was attempted from a DPC routine.
stop: 0x000000B8 (0x00000000, 0x00000000, 0x00000000, 0x00000000)

Just had another one:

DRIVER_IRQL_NOT_EQUAL_OR_LESS
stop: 0x000000D1 (0x00280000, 0x00000002, 0x00000000, 0x00280000)

My pc also reboots without me telling it to do so (still have it to give me a blue screen when an error accours).

Just had a nother BSoD

stop: 0x0000008E (0xC0000005, 0xBF849C48, 0xF6D810C4, 0x00000000)
win32k.sys - address BF849C48 base at BF800000

Just had this one aswell.
DRIVER_IRQL_NOT_LESS_OR EQUAL
stop: 0x000000D1 (0x00000014, 0x00000002, 0x00000000, 0xF97C5253)
usbport.sys - address F97C5253 base at F97AB000, datestamp 3f04cf17

try reapplying service pack1 for the usbport.sys error.

Otherwise you are looking at a driver conflict or irq conflct.

here is how to start troubleshooting the 0xD1 messages

the 0x8E message is also sp1 related

this registry fix needs to be checked for the 0x000000B8 - yes I know it says 2000, but check the registry anyway.

In this HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Clusnet\Start
I'm only able to com to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\
I'm unable to find clusnet there.

How do I reinstall sp1?

download it and double click it.

Quote:

---

Originally Posted by NooNoo

download it and double click it.

---

https://forums.windrivers.com/images.../2005/03/1.gif
Geesh, I just read this whole thing again, and we are back to reapplying service packs???? We've formated and reinstalled, tested ram and removed a seemingly bad modul. No cards in pc except for video? And STILL all these problems?
Let's go back a couple of days:

Quote:

---

Originally Posted by NooNoo

Qerr you have formatted and reinstalled... you got these errors. There is nothing for it now but to test stuff by putting it in another machine. This could be as simple as a bad ide cable.... ram timings not set right, video card ram going bye bye.

You can no longer afford to be lazy about this.

---

Quote:

---

Originally Posted by TripleRLtd

Yes indeedy, Querr has a multitude of problems. And, if the Bios has not been updated as of yet, then YES, do it! Then remove everything but the video card and ONE module of ram. And run it for awhile.
Geesh, this one has been going on for too long, and has caused arguments amongst nomally civil "tech helpers" . Sometimes a motherboard IS just bad!!! So, since the Bios update has seemingly not been tried, and since this seems to be where ALL the problems have been found to be (after all the testing of the hdd and ram), maybe, just maybe: that is the problem!!!
So, how about a complete update as to what you have done so far, what you have tested: sort of a summary Querr!

---

When I first got thise BSoDs I first did a repair install of winxp, didnt work.
I then did a clean install, didnt work, I then did some research and I eventualy found this board. Since I got here I have tested the HDD, no errors, then the ram, where there was an error and the bad ram stick have been removed.
Still got the error. Some where in this time period I removed the sound card and the ethernett card I had in my pc.

I also got another BSoD.

PAGE_FOULT_IN_NONPAGED_AREA
STOP: 0x00000050 (0x89518CE4, 0x00000001, 0xF98C7503, 0x00000000)
NTFS.SYS - address F98C7503 base at F98A4000

troubleshooting 0x50

well here is another update from me. last weekend I reinstalled windows, since so many of you said it was faulty driver or somthing like that. Now that didnt work, I could have upto 5 BSoDS during one hours, so I decided to change the gfx card, now I use an old ati radeon 7500. I installed it thursday night, and since then I have only had 2-3 BSoDs, but now I got some other problems.

The first problem is that the pc reboots with out be telling it( I have changed it so that is should show blue screen when there is a serius errror)
The secon is after the sceen has been turned off/gone to saving modus. When I then turn the screen back on it is black, I have tryed to turn of the back on the screen but that doesnt work and pushing the power button (for a very short time that is) in just turns the pc off. I have been told that the last problem is becouse the bios/windows is sett to turn the hdds of after a while but none of thise settings are on.

Have you replaced the powersupply unit in the case?

No I have not

As the rest of the people in this thread, I've been getting the 0x8E errors. I deleted the partition currently on the HDD and formatted + installed XP integrated with SP1. For some reason, which I find odd because it has never done this before, XP automatically detects everything and installs drivers for everything. I'm sure it may be the drivers and I have no clue why it is installing everything to begin with. Some of the errors I get are 0x0000008E(0xC0000005, 0xBF87BDC6, 0xF3708BF0F, 0x00000000). Like I said, its a FRESH installed copy of XP and when I try to do something, I get this error. Anyone help?

Ok... This only applies to people who have Norton Antivirus installed.


http://service1.symantec.com/support...&osv=&osv_lvl=

Try that and see how it goes.

LJ

Welcome to Windrivers LJP

Your link comes up dead... can you describe the navigation or provide the document number?
I found it in that lovely link they provided you with...
Here is the much shorter printable version http://service1.symantec.com/SUPPORT...614533906?Open