hi,
i have burning problems under winXP because windows can't load the file cdralw2k.sys
it one of my driver files.
i have HP cd-rw but they dont have drivers for winXP.
plz help, TIA
Printable View
hi,
i have burning problems under winXP because windows can't load the file cdralw2k.sys
it one of my driver files.
i have HP cd-rw but they dont have drivers for winXP.
plz help, TIA
OK try this.
- Uninstall the HP CDR software.
- Install [the ASPI layer from here
- Reboot the machine
- Using WMP8, then try to burn an audio cd from a few MP3's.
- If teh Audio CD then burns, you can then go about installing the CDR mastering software (as long as it is not an extremely old version)
This works with 99% of current CDRW drives.
------------------
FINALLY, Rocco HAS COME BACK to Win-Driverssssss......
Let the Boobies hit the floor
Or you could always wait until HP put new XP dreivers on their website when XP hits the stores... https://forums.windrivers.com/
------------------
This signature cannot be shown due to restrictions on this Board. Please contact your System Administrator
Or he could get some Tucks Medicated Pads. https://forums.windrivers.com/ https://forums.windrivers.com/ They solve most burning problems.Quote:
<font face="Tahoma, Arial, Helvetica, Verdana, Geneva" size="2">Originally posted by windowscrash:
Or you could always wait until HP put new XP dreivers on their website when XP hits the stores... https://forums.windrivers.com/
</font>
https://forums.windrivers.com/ https://forums.windrivers.com/
[This message has been edited by Mogul (edited September 25, 2001).]
I tried 6 different burning progs before I found NTI CDmaker PRO. It's the only one that works flawlessly in XP, although others claim they will.
Nero, Adaptec, WinonCD, CDRWin, and Fireburner all failed, with one error or another.
------------------
Who needs a life, I have Internet! Jim & Sue's Free Files | Jim's Modems | [email protected]
Thanks for the tip. Where can it be found?Quote:
<font face="Tahoma, Arial, Helvetica, Verdana, Geneva" size="2">Originally posted by reboot:
I tried 6 different burning progs before I found NTI CDmaker PRO. It's the only one that works flawlessly in XP, although others claim they will.
Nero, Adaptec, WinonCD, CDRWin, and Fireburner all failed, with one error or another.
</font>
------------------
I'm back like Joe Isuzu!
https://forums.windrivers.com/images.../2001/10/1.jpg
Very strange that as I have just gone out & bought a Plextor PlexWriter 241040A and installed the Version of Nero that came with it and burnt at 24X straight away with no errors!!!! Even CDR-WIN 4.0 beta burns at 24x with no errors at all!!! CloneCD works fine as well. Haven't tried Roxio yet (and probably won't as I have gone off EZCD immensely) also haven't tried CeQuadrat WinOnCD neither.Quote:
<font face="Tahoma, Arial, Helvetica, Verdana, Geneva" size="2">Originally posted by reboot:
I tried 6 different burning progs before I found NTI CDmaker PRO. It's the only one that works flawlessly in XP, although others claim they will.
Nero, Adaptec, WinonCD, CDRWin, and Fireburner all failed, with one error or another.
</font>
I haven't had any problems at all.
If you do get any problems such as 'No CDRW detected' just install the ASPI layer that I posted in my prior post.
------------------
FINALLY, Rocco HAS COME BACK to Win-Driverssssss......
Let the Boobies hit the floor
strange... i use nero, discjuggler, and fireburner all the time and i never had any problems with it running on winxp. maybe you should try the LSI ASPI Drivers for Windows NT and 2000 available <a href="http://www.goldenhawk.com/ide.htm">here</a>. don't forget to follow the instructions on how to enable support for ATAPI devices.
Well...the basic problem lies in the version of XP that I have. The ASPI layer needed to be upgraded badly, and once that was done, I encountered less problems.
CloneCD works fine, and I managed to even get Adaptec (EZCD) to work eventually. My post above refers to the ease of installation and use, without messing with ASPI.
Newer Betas and PRs of XP probably won't have the same troubles I did.
You can find NTI Pro at the software houses (www.tucows.com www.hotfiles.com) and it's a 30 day demo.
------------------
Who needs a life, I have Internet! Jim & Sue's Free Files | Jim's Modems | [email protected]
I must admit Jim, that Beta 2 of XP was diabolical for burning CD's on. Roxio 5 should work straight out of the box, as that is what is 'built-in' to XP itself.
------------------
System Specs
Abit KT7A-RAID (Rock F'n Solid!!!) - AMD Athlon 1Ghz (10x100) - 1024Mb PC133 SDRAM - ATI Radeon (AGP4X) - Maxtor ATA100 30Gb - 2 x Seagate ATA66 (RAID 0 totalling 26Gb) - Toshiba SD-1202M DVD - Plextor PlexWriter 2410A (Buy One!!!!) - Creative Labs SB Live! Value (No Pops , Hiss or Crackles here) - 20" Eizo Flexscan Monitor - Microsoft Windows XP Professional OEM Final Release
No problems here with Roxio 5 on XP.
------------------
https://forums.windrivers.com/images.../2001/09/1.gif Note to self: Re-index brain cells, database corruption present.
I've had no problems with Nero 5.X or CDR-Win 3.8x. After I updated the ASPI drivers that is.
------------------
https://forums.windrivers.com/images.../2001/10/1.gif LET THE PANTIES HIT THE FLOOR!
hi,
i've installed the ASPI update files and now burning with the build-in Roxio 5 is great, tnx.
Guess it depends on your CR Burner Version. I have the 8110i HP burner running on WinXP RC2. I couldnt use the softwware that came with it but the software on HP's website for Win2000 works. Its funny though, when I run the HP program (written by Veritas), my office2k installer starts loading, I have to cancel it like 4 time but then it works great. I can e-mail you that executable file if you like. [email protected] Dave Kessler
Over the weekend, I "upgraded" to XP corporate. No problems burning under Nero, Adaptec(roxio), WinonCD, CDRWin, NTI pro, Sony CDExtreme, or CloneCD. https://forums.windrivers.com/
------------------
Who needs a life, I have Internet! Jim & Sue's Free Files | Jim's Modems | [email protected]
The Media Player burning is total crap... Burnt a CD earlier from full tracks but on the CD there was only 60 seconds of each!!!! Going to stick with Nero & Clone me thinks https://forums.windrivers.com/ https://forums.windrivers.com/
------------------
System Specs
Abit KT7A-RAID (Rock F'n Solid!!!) - AMD Athlon 1Ghz (10x100) - 1024Mb PC133 SDRAM - ATI Radeon (AGP4X) - Maxtor ATA100 30Gb - 2 x Seagate ATA66 (RAID 0 totalling 26Gb) - Toshiba SD-1202M DVD - Plextor PlexWriter 2410A (Buy One!!!!) - Creative Labs SB Live! Value (No Pops , Hiss or Crackles here) - 20" Eizo Flexscan Monitor - Microsoft Windows XP Professional OEM Final Release
Originally posted by Darren Wilson:
The Media Player burning is total crap... Burnt a CD earlier from full tracks but on the CD there was only 60 seconds of each!!!! Going to stick with Nero & Clone me thinks https://forums.windrivers.com/ https://forums.windrivers.com/
____________________________________________
Definately,but the plextor utilities work for me.Roxio 5 had limited sucess.Still haven't loaded the Nero.