Ok, I have 2 computers running XP, that are connected to a router and a cable modem. Sometimes when I try to get on the internet IE just gives me a page cannot be found error, and also no other programs ( AIM, kazaa, ect.... ) will connect to the internet either. And this can be easily resolved just by rebooting the computer 1 or 2 times ( yes sometime 2 times) Why does XP do this? does anybody else have this problem? the lights on my modem and router are always on and functional also. thanks
Are you using DHCP to get an ip from the router? If so I found that occasionally when the lease renewed it didn't quite sort out the dns side of things - just logging off and logging back in usually solved it. The permanent solution was to set static ips for me. :D
Kazaa and XP are nasty together, run spybot and get ride of the spyware that is in your system and you'll probably see a vast improvement.Quote:
Originally posted by coolmandingo
..., kazaa, ect....
How do I check to see if I am using DHCP to get an ip form the router? and about something not sorting out the dns side of things, could this be the fault of my cheap router ( Belkin 4 port )? how do I set it to a static ip? thanks for the help!Quote:
Originally posted by NooNoo
Are you using DHCP to get an ip from the router? If so I found that occasionally when the lease renewed it didn't quite sort out the dns side of things - just logging off and logging back in usually solved it. The permanent solution was to set static ips for me. :D
yes i got familiar withthe spyware coming from kazaa, but now the I just did a reformat of my computer and a fresh install of XP I still have this odd problem.Quote:
Originally posted by Matridom
Kazaa and XP are nasty together, run spybot and get ride of the spyware that is in your system and you'll probably see a vast improvement.
in XP, go to your network connection, double click on your network card, properties, and you'll see a spot where it shows "tcp/ip" go into it's properties and it will say on the first screen wether it's dhcp or not. that is also where you set a static IPQuote:
Originally posted by coolmandingo
How do I check to see if I am using DHCP to get an ip form the router? and about something not sorting out the dns side of things, could this be the fault of my cheap router ( Belkin 4 port )? how do I set it to a static ip? thanks for the help!
ok, I checked and it says that i have DCHP enabled, about the static IP thing, how do I set it and how do I know what to set it as? do I hve to buy a static IP from my ISP? cause I hear about ISPs selling them?
with a router, no. you use your internal IP's to set static.Quote:
Originally posted by coolmandingo
ok, I checked and it says that i have DCHP enabled, about the static IP thing, how do I set it and how do I know what to set it as? do I hve to buy a static IP from my ISP? cause I hear about ISPs selling them?
however, before you do this, have you run spybot?
http://beam.to/spybotsd
yeah, I just ran spybot and removed everything it found
that will propbably solve the problem right there.Quote:
Originally posted by coolmandingo
yeah, I just ran spybot and removed everything it found
if not and you want to set static IP's, go to start, run and type cmd, then type ipconfig /all in the black window
you should get something like this
you then need to take all that information and put it in the tcp/ip settings you went to earlierCode:Connection-specific DNS Suffix . : local
Description . . . . . . . . . . . : Intel(R) PRO/100 SP Mobile Combo Adapter
Physical Address. . . . . . . . . : 00-03-47-XX-XX-XX
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
Lease Obtained. . . . . . . . . . : Saturday, August 23, 2003 10:24:00 PM
Lease Expires . . . . . . . . . . : Sunday, August 31, 2003 10:24:00 PM
thanks so much for the help! I will try all that.
DHCP was inventited for lan management on large networks, so that admins would not have to run to each station to change ip info whenever a server changed.Quote:
Originally posted by crazyman
question,I have my router to automatically assign ip's to my 5 pc's here at home,and the ip's change as the boxes are shutdown and rebooted,no big deal,but do you think the lan is faster with static or dynamic ips?
or is there any benefits to either way?
:)
The only difference is that a system configured to DHCP will take slightly longer to boot up, like all of 1-2 seconds. Once the IP information is obtained, there is no difference.
If a computer is set for DHCP and is unable to obtain one during startup (say like no DHCP server) then it will add 30 to 60 seconds on bootup.
I've been running a DHCP server on my home system for several years, and have never had a problem with it.
Again, on large lans, DHCP does create traffic, and needs to be taking into account. On home networks, it really should not matter... unless there is a problem with your DHCP server.
would a better router assign DCHP faster and more efficiently or is it all a process within windows?
Its a function of windows. A router supplies the info, it is up to windows to use it, so no, a different router would not supply the info any faster.Quote:
Originally posted by coolmandingo
would a better router assign DCHP faster and more efficiently or is it all a process within windows?
If he still wants to use DHCP, maybe increase the lease time. I've seen some home routers that set it to a couple hours by default
I checked my lease time and it is set to forever.