Printable View
Acquired this in a "horse trade" I was planning to install Win XP on it This a PIII 500 machine. I see on HP drivers a keyboard driver, a net card driver and thats about all. Will XP pickup the onboard sound, the video driver and USB?, or am I out of luck and stuck with Win 98SE on this one?
Jim
A four year old PC: WinXp will find and install everything just fine, usually.Quote:
Originally Posted by jaimicook
I didn't check, but I am sure we're talking about an Intel 810/815 chipset, right?
Vectra VL? Even if it's Via, no problemo.
Did HP ever use Via? I can't remember...it's gettin late.
No, you shouldn't have any problems, and if you do, you can still download the drivers elsewhere.https://forums.windrivers.com/images.../2006/04/1.gif
if you pull off the lid / side and let us know what kind of board it is (wheather its onboard video or agp/pci video) and a board model, someone will be able to help you out :)
You will be able to download video drivers from most places,
Good luck
I actually have one of these puppies, although not the pizza box version. The VLi8 uses an intel bx chipset, so XP should identify it fine. Mine is running W2K, so XP might identify some things that W2K does not. These were orignially sold w/ NT or 98, so HP never provided much in the way of updated drivers for XP or W2K. Technical reference manual is available here: http://h200002.www2.hp.com/bc/docs/s...2/lpv06682.pdf
It has integrated Cirrus CS4280 sound. If XP doesn't identify it, try this W2K driver (didn't see an XP driver on the Cirrus web site) http://www.cirrus.com/en/software/dr...dio/PW3041.zip
The video is integrated Matrox MGA-200. XP driver is here: http://www.matrox.com/mga/support/dr...kxp_588061.cfm
Integrated Matrox, huh?
You don't see that too often.
And IMO they missed the boat not taking advantage of that market.
Yeah this system uses Matrox on-board video... was pretty good videocard years back...Quote:
Originally Posted by TripleRLtd
Motherboard (if I remember it correctly) is made by FIC (OEM) model KZM-6120
http://www.fic.com.tw/support/motherboard/cputable.aspx
Yes, they were one of the best.Quote:
Originally Posted by Ruslan
That is why I say they missed the boat.
Look at what ATI has become after all those years of bad driver releases.
They offerred integrated chips to MB makers and here they are now, one of the the Big Two.
And, where is Matrox, as good as they were and IMO still are?
Just in case you're having probs with the HP Vectra VLi8 bios and you can not access your operating system at all do this: get this bios file:
http://h20000.www2.hp.com/bizsupport...s+OS&tech=BIOS
Crisis recovery flash process.
To be used if your bios is corrupted and you can't boot normally
a. Format a floppy disk under DOS and make it bootable.
b. Copy the required platform.bin, phlash.exe and BIOS image ("hz0110us.FUL").
Add the following line in AUTOEXEC.BAT file:
PHLASH hz0110us.ful /c /pf=b /V /mode=3
that's foreward slash V above by the way
c. Insert the floppy disk, set switch 2 (BIOS CRISIS RECOVERY), power-on the system.
d. Several beeps can be heard during 1-2 minutes.
The long beep at the end means that Bios flashing is finished.
e. Press power button during 5secs to power off the system.
f. Reset switch 2, remove the crisis floppy, and power-on your system again.
Here are switches to use with phlash.exe
/H displays the help screen with all parameters available
/B Binary file to be loaded as platform.bin
/V Compare BIOS image file and flash EEPROM after
flashing
/C BIOS will automatically load CMOS default at
following boot
/P Production mode: no screen ouptuts, no beeps,
auto reboot
/S Silent: no beeps
/EXIT Exit to DOS instead of rebooting
/pf=b Standard flash process. The Bootblock is flashed.
/MODE=3 Updates DMI strings.
Ex: phlash.exe /B=platform.bin /C /V /pf=b
Hope this helps
Welcome to Windrivers Scottozy and thanks for the tips!
I have one running under XP Pro. All drivers are installed by XP. No problem. My wife is happy with it. I did, however, replace the 6 gig hard drive with a Western Digital 20 gig which was a discard from a previously done upgrade. I also put in a 256 meg pc100 memory stick to replace the 64 meg provided. I would suggest that it will run a lot better with those changes.
Jim
Got one just few days ago . Installed WinXP Prof., it detected everything by itself . Intel 440BX chipset , Crystal SoundFusion 16bit Integrated Audio , 3C905B-TX 10/100 Mbps Integrated Network Adapter, Intel Celecron MMX 500 MHz (SL3FY) Processor (FSB 66MHz)(Socket/PGA 370)(http://processorfinder.intel.com/scr...sp?sSpec=SL3FY) , Motherboard KZM-6121 Rev 1.3 , Phoenix Tech Ltd HZ 01.05US, 10/8/1999 Bios , HP Vectra VLi8 SF (D9456T) , 256 MB (16 Chip, CL3, MT) PC133 + 128 MB (8 Chip, LD) PC133 = 384 MB SDRAM .
Obtained info that it can take max 512 MB SDRAM . But don't know what max speed processor it can take with what FSB ?
Also noticed that Secodary IDE Connector is a 50 pin laptop type female connector, anyone knows where to get converter interface to convert to a regular 40 pin ide ?
Thanks.
Right Now I'm Using ...
SL3FY 500.00 MHz 66 MHz 0.18 micron mB0 128 KB PPGA 2.0 volt 7.5 Bus/Core .
Another person (From Internet) using P III 650 MHz PPGA ...
may be ...
SL3XV 650.00 MHz 100 MHz 0.18 micron cB0 256 KB 370 pin PPGA/FC-PGA1 1.5 v 6.5 Bus/Core .
If overclocking possible only with 66MHz FSB Processors (with 0.18 micron) then Max Speed Celeron Processor Probably can be ...
SL4QF 766.00 MHz 66 MHz 0.18 micron cC0 128 KB 370 pin PPGA 1.6 v 11.6 Bus/Core .
If overclocking possible only with 100MHz FSB Processors (with 0.18 micron) then Max Speed Celeron Processor Probably can be ...
SL5XR 1.10 GHz 100 MHz 0.18 micron cD0 128 KB 370 pin PPGA 1.75 v 11 Bus/Core .
If overclocking possible only with 100MHz FSB Processors (with 0.18 micron) then Max Speed Pentium III Processor Probably can be ...
SL5QW 1.10 GHz 100 MHz 0.18 micron cD0 256 KB 370 pin PPGA 1.75 v 11 Bus/Core .
What Speed processor you're using , what cache size , what stepping ?
Thanks
Welcome to windrivers tarik. Manuals for that model:
http://h200005.www2.hp.com/bc/docs/s...3/lpv06673.pdf
http://h200005.www2.hp.com/bc/docs/s...2/lpv06682.pdf
Your issue as far as processor support is not the bus speed, but the bios and voltage. You will need to flash the bios to the latest version, but even then the fastest processor supported I believe is 600MHz or 800MHz
http://forums1.itrc.hp.com/service/f...threadId=61631 There is some question if the motherboard can handle the voltage of the coppermines.
On Internet someone selling it with 600 MHz processor , also . 600 MHz Celerons are either 1.5 or 1.7 volt . 600 MHz PIIIs are either 1.6 or 1.75 volt , mine one (Celeron 500 MHz) is 2.0 volt . So most likely mobo supports these voltages . But not sure . Will check your links now . Many many thanks .
I've got the VLi8 minitower, which is slot 1, not socket 370. It uses a FIC KZM-6120 mobo. I know it will take a p3 up to 750 or 800. Don't know if the SF uses the same board or a different one - any identifying markings? The bigger issue however, is bios support. I think you will probably get more bang for the buck with a P3.
"hudsonsmith" Many Thanks Again for the great links of HP manuals , perfect , things becoming more clear .
Its not 440BX it is 440ZX chipset .
Checked that forum , they are talking about Tower(VLi 8) / Desktop(VLi 8SF) model with Slot Processor , mine one is Desktop model (VLi 8SF) with Socket PPGA 370 (Plasic Pin Grid Array) , Sytem # D9456T (D9456-60201) (KZM-6121 Rev 1.3) . Because of your mentioned manuals it(Tower/Desktop) became very clear .
On the lpv06682.pdf manual , Page 26 mentions about VLi 8SF desktop model with socket PPGA 370 ... Saying can take only Celeron processor . Don't think it is right , as 440ZX chipset supports Celeron, PII, PIII . This Board shows on a sticker that it supports 550 MHz processor with 100 MHz FSB (Front Side Bus) , which can only be PIII processors with 100 MHz FSB , as there are no Celerons made/available with 100 MHz FSB with 550 MHz processor speed . Board showing this info on a white sticker on the board surface , most likely this is printed with wrong info for this model (or, right info were not available) .
On the lpv06673.pdf manual , Page 4 & 8 showing support of 600 & 650 MHz PIII Processors with 100 MHz FSB . Their spec ...
SL3XV 650.00 MHz 100 MHz 0.18 micron cB0 256 KB 370 pin PPGA/FC-PGA1 1.7 v 6.5 Bus/Core PIII ,
SL5BT 600.00 MHz 100 MHz 0.18 micron cD0 256 KB 370 pin PPGA 1.75 v 6 Bus/Core PIII .
Means motherboard also supports 1.7 & 1.75 volt , but not sure if its the PPGA or Slot version board . Couldn't find more info on the Sytem # on the internet to cross-reference and make sure .
If this (VLi 8SF with Socket PPGA 370) board can ONLY support 2.0 volt processors then max it will take is ...
SL3FZ 533.00 MHz 66 MHz 0.25 micron mB0 128 KB PPGA 2.0 v 8 Bus/Core Celeron ,
or, SL3PZ 533.00 MHz 66 MHz 0.25 micron mB0 128 KB 370 pin PPGA/PPGA2 2.0 v 8.1 Bus/Core Celeron .
If board can supply 1.75 volt ALSO then max processor will be ...
SL5XR 1.10 GHz 100 MHz 0.18 micron cD0 128 KB 370 pin PPGA 1.75 v 11 Bus/Core Celeron ,
SL5QW 1.10 GHz 100 MHz 0.18 micron cD0 256 KB 370 pin PPGA 1.75 v 11 Bus/Core PIII .
If board can supply 1.7 volt ( & 2.0 v only) then max processor will be ...
SL4SD 900.00 MHz 100 MHz 0.18 micron cC0 256 KB 370 pin PPGA 1.7 v 9 Bus/Core PIII ,
SL5GA 850.00 MHz 100 MHz 0.18 micron cC0 128 KB 370 pin PPGA 1.7 v 8.5 Bus/Core Celeron .
So , i need to find out from those online seller or from other source ... that ... are they using slot or ppga processor on those VLi8SF desktop ?
Thanks .
thank you i will give it a try i did not know that taking the battery out could do that.Quote:
Originally Posted by scottozy
where could i find a kzm6120 driver?.. is there anybody who can help me? i'm having problem with my mouse when my os was upgraded from win98 to win xp prof.. here's the spec of my pc:
PIII 550 Mhz-processor
KZM6120 - motherboard
82xx - intel chipsets
Welcome to Windrivers floro
Which particular driver did you have in mind? here is the hp page for your machine XP should have most of the drivers, so which ones do you need?
Quote:
Originally Posted by Tarik
I run a 800 MHz PIII with 100MHz FSB since about 2 years with a slot adapter. So the core voltage is OK.
But what about memory? specification says: max 2x256 MB. 512 is very little today. did somebody try with 2x512 MB?
regards
Welcome to WinDrivers regn, and thank you for the thought.
There probably won't be any response though, as the discussion was from four and a half years ago.
The Product Specs says that it uses PC100 memory. As far as I know, PC100 maxes out at 256MB each. If you can find 512MB's for PC100's, give it a shot and let us know how it goes.