Help!! Drivers needed for K56H Keycorp LCD Monitor

Printable View

January 16th, 2004, 11:18 AM
breezeasy

Help!! Drivers needed for K56H Keycorp LCD Monitor

Hi! Can anyone help me with drivers for a LCD monitor tagged with Keycorp badge model number K56H that has its own ISA SVGA adapter.Searched everywhere for this driver and keep coming up empty handed.
January 16th, 2004, 11:37 AM
hudsonsmith

Are there any identifying numbers or writing on the adapter?
January 16th, 2004, 12:02 PM
breezeasy

Thanks for replying. The card uses a Chips & Technology chipset F65540 with K56 SVGA Ver 2.00 bios. I have been able to locate drivers for all other keycorp models except the K56 range. It's like they never existed.

[QUOTE=hudsonsmith]Are there any identifying numbers or writing on the adapter?[/QUOTE
January 16th, 2004, 02:04 PM
hudsonsmith

Chips & Technologies sold out to Intel, who sold out to Asiliant. Asiliant's driver page is here: http://www.asiliant.com/driver.htm, but they don't list anything for the 65540. Intel lists win 95, win 3.1 and nt4 drivers http://downloadfinder.intel.com/scri...s&submit=Go%21 The newer OS's may not support the chip.
January 16th, 2004, 02:45 PM
NooNoo

found this before..... hmmm either in the company forums or here, within the last 6 weeks. Will go digging in a bit.

Edit: here
January 16th, 2004, 08:29 PM
breezeasy

Quote:

Originally Posted by hudsonsmith

Chips & Technologies sold out to Intel, who sold out to Asiliant. Asiliant's driver page is here: http://www.asiliant.com/driver.htm, but they don't list anything for the 65540. Intel lists win 95, win 3.1 and nt4 drivers http://downloadfinder.intel.com/scri...s&submit=Go%21 The newer OS's may not support the chip.

Found that information out already on my search for the drivers and tried the drivers on the intel site for win95 on an older machine running win95 and they don't work. Infact when the card was installed in this machine win95 recognises the card as a CHIPS & TECH ACCELERATOR and proceeds to install the driver from the OS CD but when restarted the OS comes back with error saying your display adaptor is not configured properly.?? Strange!! The later models such as the K57 range use a PCI card and drivers are available for these. Another option would be to obtain this particular card, but then would it run the the K56H LCD monitor??? A manual or something would be great if there is one available somewhere. Thank you for your help it's much appreciated, anything else you could find or any ideas would be great.

Thanks
breezeasy
January 16th, 2004, 08:38 PM
breezeasy

Quote:

Originally Posted by NooNoo

found this before..... hmmm either in the company forums or here, within the last 6 weeks. Will go digging in a bit.

Edit: here

Hi!! NooNoo
I think it was you that found the drivers for somebody's Keycorp K57H LCD monitor . Hope you can Help here also. Would appreciate any information on this.

Thanks
breezeasy
January 17th, 2004, 05:15 PM
NooNoo

Quote:

Originally Posted by breezeasy

Hi!! NooNoo
I think it was you that found the drivers for somebody's Keycorp K57H LCD monitor . Hope you can Help here also. Would appreciate any information on this.

Thanks
breezeasy

Did you click the link and go through the other thread and the links from there?
January 18th, 2004, 01:40 AM
breezeasy

Quote:

Originally Posted by NooNoo

Did you click the link and go through the other thread and the links from there?

Yes, but that was for a k57h and mine is a k56h, the 57h uses a pci card and the 56h uses an ISA card the drivers don't work on my model.
January 18th, 2004, 06:19 PM
NooNoo

the isa one is listed at the very bottom

run the chip id utility as well.
January 20th, 2004, 02:22 AM
breezeasy

Quote:

Originally Posted by NooNoo

the isa one is listed at the very bottom

run the chip id utility as well.

Thanks again for your reply. The drivers here are only for 65545, 65548, 65546 VL/ISA BUS. My chipset is 65540 no need to identify it with utility is written clearly on the card. I have tried these drivers in the past just on the off chance they may work, but no such luck.

Thanks Anyway
breezeasy
January 29th, 2004, 07:04 PM
gpnz2000

K56h

Hi

I have a K56H monitor and I am looking to see if an ISA card is available for it. I am in NZ. Any ideas?

Thanks
January 30th, 2004, 03:01 PM
NooNoo

Welcome to Windriver gpnz2000!
Ebay or 2nd hand computer dealers is your best hope.
January 30th, 2004, 03:10 PM
NooNoo

Quote:

Originally Posted by breezeasy

Thanks again for your reply. The drivers here are only for 65545, 65548, 65546 VL/ISA BUS. My chipset is 65540 no need to identify it with utility is written clearly on the card. I have tried these drivers in the past just on the off chance they may work, but no such luck.

Thanks Anyway
breezeasy

these might be worth a shot
February 24th, 2004, 03:27 AM
conan_976

Look man I have exactly the card and monitor

As I said I've got exactly the same card and monitor and the best I've been able to do is 800*600 in 256 colours and well did you get them working yet? Oh well I will check back later for your answer I'll go and try the ones ive just found.(Stupid F#$%@en KEYCORP.........cya
July 9th, 2006, 02:33 PM
Ragnarokampman

Here's where U can find all Keycorp drivers.

http://www.asiliant.com/driver.htm
Worked for me, so it may as well work for U.
July 9th, 2006, 02:38 PM
Ragnarokampman

ISA BUS keycorp drvs

for ISA bus use 65545
July 9th, 2006, 07:22 PM
geeksRus

this thread was 2 and a half years old...