Printable View
I just did a clean install of windows xp professional on a computer i just bought off a friend meaning i've lost all drivers.
I have list of what was installed before the computer was wiped and it says the sound card was:
Creative AudioPCI (ES1371,ES1373) (WDM)
However i cannot find drivers for it.
The only ones i can find say it needs to be installed before they can be (i'm guessing they are only driver upgrades or something?).
How do i find the files required to install this device?
i read another post about drivers and they said they needed the motherboard model so here it is:
Board: Acer J87M
Bus Clock: 100 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 09/17/2002
Welcome to windrivers ollypop. Is this a separate sound card or built into the motherboard? If it is a separate card, there should be a four digit number preceded by CT or ES on the card. If it is ES1371 or ES1373, there will not be a download from creative - these chips are natively supported in xp.
If it is built in, what is the acer computer model # or part # (assuming your acer mb is in an acer computer)?
Hi! I am a new member, who just subscribed on this web site. I am looking for anyone who might have software for Creative Audio PCI Slot (ES1371,1373) WDM. Help! Bingo400
Hi! I am a new too member,please I am looking for anyone who might have software for Creative Audio PCI Slot (ES1371,1373) WDM. Help! thnx
thanksssssssssssssssssssssssssssssssssssssssssssss sssssssssssssssssssssssssssssss
thanksssssssssssssssssssssssssssssssssssssssssssss
Hi! I am a new too member,please I am looking for anyone who might have software for Creative Audio PCI Slot (ES1371,1373) WDM. Help! thnx
Welcome to Windrivers motsha
The thread explains that you don't need drivers for this as XP has the drivers already... and there are links to the creative drivers if XP doesn't pick it up automatically. Just read the thread.
Thanksssssssssssssssssssssssss For You
This didn't work for me :( someone help me please??!!!
Welcome to Windrivers marktippins
What make and model of computer do you have?
Cheers mate.Quote:
Originally Posted by NooNoo
It's a gateway lol. I am replacing it soon.
Ah it's okay now, after 4 hours of searching i found the right driver, the start up jingle made me happy. If anyone is still finding problems with this just email me and i will give you the driver, 100% works for the es1373 audioPCI soundblaster.
mark:)
Where did you get the driver Mark? Gateway support should have one!
مشكوررررررررررررررررررررررر
thankkkkkkkkkkkkkkkkkk
Did you have a question medomghed?
Creative (Was:Ensonig) ES1371,ES1373 Audio PCI
hello guys,
I bought the Audigy SE, at least thats what it is at the invoice, and when I installed it, it just showed the audioPCI (ES1371, ES1373)(WDM) at devices.
Is it a FAKE card?
I tryed to install the creative driver for my sound card model SB0570 and the software says that could not find any creative card!!!!
Reading a lot at foruns someone said that I have to have the Microsoft auu HD audio installed, well that does not show at my list, but I have the SP3 installed...
My machine is:
Asus M2N4-SLI
2Gb kingston RAM
XFX 7600 video card
on-board sound disable
Audigy SE (I think)
pls help.
I read that, but the link just lead me to some initial webpage. I feel like been robed!!!Quote:
Originally Posted by OMGmissinglink
Is that really an AUDIGY SE card?
Yes, that is my card, and I have download those files, and none of it worked.Quote:
Originally Posted by OMGmissinglink
When I start the installation it gets me this message:
"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup program."
And it ends.
that is my card, the model number on the card is SB0570...
Im very disapointed, and probably will return this back to the shop.
If there is no reaction from Windows when you put the card in and start the pc, then it's likely to be faulty. Was it properly boxed when you bought it? does it look like this?
1 - I have disabled the on-board sound.
2- I have changed the PCI slot.
I did almost verything, but then some came up to my mind!!!!
I installed an creative LIVE 24 bits instead and BINGO, it was detected just as perfect, I even installed the audigy drivers, YES it worked like one, and more..... I downloaded the brazilian driver, I mean the creative driver for x-fi MODED by a Brazilian guy that change an AUDIGY into an X-FI.
Beatiful, it works and the sound is WAY BETTER!!!!
I will return the Audigy card back to the shop I guess that is a fake!!!
Thx you guys anyway.
Anytime
I have a Compaq Persario 7000US with a Creative Audio PCI Slot (ES1371,1373) WDM. I had to reload XP and don't have sound. Can someone help me find my driver?
Thanks
XP has built in drivers for this card. If it doesn't work, use the Windows 2000 drivers supplied by compaq hereQuote:
Originally Posted by dominoguys
thaksssssssss
thanks i real need it
مشكووووووووووووووووووووووووووووووررر يا معلم
Please help me with the es1373 audioPCI driver marktippins, I'm having the same problem.Quote:
Originally Posted by marktippins
PLEASE HELP!!!!
I have an issue that has been going on for over a month. I "upgraded" from Windows XP to Windows 7. My sound application shows that I have Creative AudioPCI (ES1371, ES1373) (WDM). After paying someone numerous times to get my studio program to work right, today I looked at pics of sound card displays under recording devices and THOSE showed the mulitple USEABLE recording devices SIMULTANEOUSLY having a volume meter next to it. In my sound card, I currently use the speakers (of course), the line in, and the microphone jacks. The difference in the image I saw online and mine, however, is when my LINE IN shows as my set default device it is the ONLY device with a volume meter next to it, while my microphone suddenly shows as "currently unavailable". When I make the mic volume the default device, the LINE IN suddenly becomes "currently unavailable". That's a problem which shows when I try to use my home recording studio. Say I want to first record something from my keyboard and it is recorded with no problem (line in= default device). Then I want to record myself on the microphone, so I switch the set default to "mic volume". EVEN though the volume meter shows activity when I speak ON THE SOUND APPLICATION, absolutely nothing is recorded on the home studio program. In fact, my comuter is still stuck in LINE IN mode, because if I cut the keyboard back on, despite my "mic volume" being my current set default, my studio program still picks up on the LINE IN, as if I never left it. Please help!!!