Printable View
Ok, sounds wiert, but its needed
Windows Xp blocks things going in and out of the parlel port when in dos prompt
i need to set to FULLY open. How the heck i do that?
This is needed for a "special" network (PC <> Amiga)
:guns: So what i need to kill of win px? :guns:
explain exactly what your scenario is and what is needed to be accomplished, and I'm sure we'll have some ideas.Quote:
Originally Posted by Dr. Dude
:rolleyes: Ok here go's
I am holding my self a Amiga 1200. and i am holding things on the pc, that needs to be put on the Amiga. Basic i need is a network
i have the cable and software for it. In win 98 it works perfect.
:sad: But that comp has given its life to its creator, and its left over its death :sad:
So now i am stuck whit win xp. And win xp close's the paralel port for dos
and my network prog is in dos. (its basic a sort small server)
And i am NOT going to do a reinstall, just to get Win 98 and xp on this comp
I'm not sure about this completely because I'm sure the software is propriatary, but on the XP machine check and make sure direct cable connection software is installed. run the network setup wizard . . . . I think there is an option to set up a direct cable connection via printer port. not sure since I can't run the network setup wizard on this computer (part of a domain.) when I get home for lunch I'll check it out and post back.Quote:
Originally Posted by Dr. Dude
And remember..winxp just has dos emulation..not true dos
:rolleyes: still, the prog does run, but hmmmmmm, it doens't say its have found dos 7.0 (or something like that)
And i already am part of a network
And the win xp network wizard does not have a paralel setting in it.
AND, its not a network from pc <> pc. But Amiga <> Pc
I can run this prog in plain dos (by useing a win 98 disk)
but er... i have a raid Hd. And that needs drivers. NO drivers? NO hd to find.
so why not dual boot dos and xp? Its easy enough to do.
:eek2: er....sounds cool.....but how?
what would even be cooler and more elegant / less intrusive is to get virtual pc ($149 - I prefer VMWare, but it's cost prohibitive at around $400) and just run a virtual 98 or DOS machine inside your XP OS. No rebooting when you need to transfer files to the amiga, just boot up the virtual machine.
of course and even cheaper solution would be a $20-$40 2 port KVM switch and a piece of junk pentium machine under your desk (233mhz - heck even 133mhz would work) running DOS and your amiga server program. just change control of the keyboard mouse and display back and forth as needed.
create a one gig primary partition. Install dos. Reinstall xp to get the bootloader back.
First of all i am not going to spent cash in it.
Install Dos and then install Win xp again? Oh yeah thanks, i need to reinstall evry damm thing on my comp again :mad: .
And why Dos? Why not just Win 98 then?
There must be a other way around to dos (yeah load it up whit a win 98 startup disk)
But then i have no HD....as its raid :redeyes:
So is there a way to "rebuild" a win 98 startup disk, so it will load my raid drivers?
How many Megs of data to send to the Amiga? If the system has a CD burner, can you burn the data to CD then boot dos with CD-ROM support from the 98 disk, run the program & copy the data from the CD?Quote:
Originally Posted by Dr. Dude
:thumbs2: Heyyyy yeah. for getting stuf to the Amiga it will work....but the other way around not
heck, you could always toss in an extra drive say 1gb. I don't know about you but I think most folks have stuff like this laying around. format it fat16 or fat32 and use a startup disk.
If you are in the states, and willing to pay $5-$8 for shipping, I'll send you a spare drive
Yep, got the picture. Kato's hard drive idea sounds good to me.Quote:
Originally Posted by Dr. Dude
And you dont need to install EVERYthing, just an inplace install of xp to get the boot loader back on the boot partition.
I didn't explain very well I guess, but you would need to create a new partition using a partition manager of one gig, install dos or 98 whatever, on this partition. XP is now on d and will not boot, but if you run a repair install also known as an inplace install it will sort it out for you and you losing nothing.
Well i am now in doubt it will work
I made a cd whit the network thing on it
load up dos whit 98 boot disk
place the network stuf in my Ram (so it can read and write where it wants)
Now the Amiga seems to find it.....sort of
if it go's good, i am able to see ALL pc drives, and can do anything whit it.
But i get mounting error, so i can't see a singel drive :eek:
I am probly missing parallel drives for dos or something like that :rolleyes:
I am now busy storing inportand files and stuf to a other comp
- Will place this HD out of raid (i have no idea why i made it raid anyway)
- Place win 98 on D:
- Place win xp on C:
I see if i can install a thingy to make sure Win 98 reads and writes a NTFS partitions