Printable View
I have a internal dvd/r in an enclosure attached to my laptop ...One the computer akcnowledges it but seems to have it as a dvd/cd-rom drive not a dvd/r , I can't write and have accomplished a burn but ONLY with dvd dycrypter .Nero wont even budge.
the drive is a Sony dvd rw aw-q170a
my configuration ( to the best of my understanding):)
xp pro sp2 80 gig 512ram
any help would be greatly appreciated
The fact that you are able to burn using dvd cycrypter tells me that the burner is working. You just need to use the proper burning software.
Which version of Nero are you using? I don't think that 5.5 can handle burning DVDs.
You might need version 6.0 at least. They are up to version 7 now.
http://www.nero.com/enu/index.html
Yeah I know I can burn buts its not the software , At least i don't think so when using decrypter it takes about an hour and a half before the program writes the lead in, Im using 6.6 nero .. So im thinking its something with the laptop( drivers ) since it reads the drive really low if at all .. any thing else i can check?
Usb 2 or 1.1?
2.0
Is the connecting cable rated for 2.0? For that long to do the lead in there is a data transfer problem. Nero has a drive test utility - what does that have to say for itself?
Just went to take a look and nero doesn't even see it, even though it appears in my computer. What is also interesting is that the computer itself nocks it out every now and again ( will disconnect itself , not appear in my computer)
by the way info tool tells me aspi is corrupted can that have anything to do with it
It has the ability to stop nero seeing the drive, yes.
Thanks for the info , do you by any chance have a resolution i can intent.....
repair the aspi... how to and about aspi.
nope repairing the aspi didnt help, i'm considering reformatting. Thanks for your suggestions though. :)
how did it go?
Nope, well i did reformat but while installing I realized that the only high speed connection I have is through a four pin ieee so the others are 1.1, So i am assuming that is I use a pcmcia card that has usb 2.0 it wil work a little faster.
Thanks for asking :)
USB 2.0 on pcmcia can be tricky - make sure you install the card and test it with something innocuous like a mouse before plugging in external drive.
Hey there, I am having the exact same problem and from my looks on the net, it is the aspi. I have downloaded and installed the latest but they are still coming up as the wrong version. The proper versions for xp that i can see are 4.7 for all 4 drivers. I have been working on this for over a week. Maybe we can figure it out together. I am having the exact same symptoms you are. Is it possible to delete the aspi folder and then reinstall it???
Welcome to Windrivers 13leags
read here you can use the uninstaller in force aspi.
Thanks I'll take a look and let you know if it worked...
Well I deleted the aspi then reinstalled them to no avail, I think my problem might be with the 1.1 usb ports so I ordered a pcmcia card with 2.0 to see if that works. I have been able to burn with dvd decrypter just takes a while......
The seller I got the burner from has sent me the proper configuartions for the sony so I will post them here after I check them out tonight after work......
Hey again. Here is what he sent me...
Dear valued Sony Customer,
Standard controller/disable DMA/disable CD Recording
Please ensure the system is in the correct configuration:
1. Change the main controller you have to a Standard Dual Channel Controller
Open the Device Manager(open up the Start menu, right click on My Computer,
left click on Properties, click on the button labeled Device Manager under the Hardware tab
Click on the + next to IDE ATA/ATAPI Controllers A Primary IDE channel, Secondary IDE channel,
and a PCI Controller (sometimes an Intel or SIS or VIA) will be listed
Double click on the controller, click on the Driver tab, then click on the Update Driver button
This will open up the Hardware Update Wizard, if it asks if Windows can search select No, and click Next
Choose "Install from a List or Specific Location," and click Next
Select "Don't Search, I will Choose a Driver to Install" and click Next
Under "Model" select the Standard Dual Channel controller and click Next
Click "Finish"
At that point a window will appear with Standard Dual Channel printed at the
top. Close this, but do not restart your system if it prompts you to.
2. Disable DMA:
7 Double click on the Secondary IDE Channel.
7 Click on the Advanced Settings tab.
7 Change the Transfer Mode for Device 0 from DMA to PIO.
7 Click OK
3. Disable CD Recording:
Open up My Computer.
Right click on the Sony drive and left click on Properties.
Click on the Recording Tab, uncheck the box next to Enable CD Recording on
this drive. Click apply and okay.
If a Recording tab does not appear, go to Control Panel/Add-Remove Programs
and remove all of your Roxio or EZ CD Creator software. Log onto
www.roxio.com and download and run their registry cleaning tool.
http://kb.roxio.com/content/kb/EE6000061. Reboot and disable your Cd Recording.
From here you will want to reboot your system to let those changes take
place. The drive should be working at its peak after these changes.
Please visit our website at http://sony.storagesupport.com/ for all the
latest upgrades and up to date FAQ's.
This seems to have fixed some problems but now the error I get is drive wasn't ready and invalid format. I believe it is the dvd+r discs I am using as I have had several friends of mine tell me they have had tons of probs with them. Any idea what to do to correct it so the burner will recognize dvd+r?
and now this is the error I get from nero...
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0
Recorder: <SONY DVD RW AW-Q170A> Version: 1.70 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW AW-Q170A >Version: 1.70 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <USB 2.0> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : AOpen DVD-1640 PRO atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-75EVA0 atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW AW-Q170A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048020kB)
Free physical memory: 236MB (242460kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.1.2007
ISO compilation
10:51:41 PM #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:51:42 PM #2 Text 0 File Isodoc.cpp, Line 6508
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:51:42 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
10:51:42 PM #4 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media
10:51:42 PM #5 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3787311 (841:37.36, 7397MB)
10:51:42 PM #6 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO
10:51:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: SONY DVD RW AW-Q170A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D04, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:51:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:51:42 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3787312 (3787312) = #3787312/841:37.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3787312 blocks [Main]
--------------------------------------------------------------
10:51:42 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [SONY DVD RW AW-Q170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7756414976, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 3787312 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3787312 | 0 | 0x00
3787312 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
10:51:42 PM #11 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:51:42 PM #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
10:51:42 PM #13 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.
10:51:42 PM #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
10:51:42 PM #15 Phase 28 File dlgbrnst.cpp, Line 1746
Speed measurement started
10:51:47 PM #16 SPTI -600 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x23 00 00 00 00 00 00 00 6C 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x067a5e00: Len x6c
10:51:49 PM #17 SPTI -600 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x067c6400: Len x804
10:51:52 PM #18 SPTI -600 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x067c6400: Len x804
10:51:52 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:07:33 PM #20 Text 0 File WriterStatus.cpp, Line 112
<SONY DVD RW AW-Q170A > start writing Lead-Out at LBA 3787312 (39CA30h), length 0 blocks
11:07:34 PM #21 Phase 29 File dlgbrnst.cpp, Line 1695
Speed measurement completed: 6x (8,304 KB/s)
11:07:34 PM #22 Text 0 File Burncd.cpp, Line 4336
Can only write at 4x instead of 8x,
because speed of source data is too slow
11:07:34 PM #23 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 4x (5,540 KB/s)
11:07:36 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:07:36 PM #25 Text 0 File DVDPlusDualLayer.cpp, Line 470
Disc finalized, LBA total Image size: 3787312 (7397MB), Last LBA L0: 1893663 (3698MB)
11:08:07 PM #26 SPTI -1066 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x067f9400: Len x804
11:08:07 PM #27 Text 0 File DVDPlusDualLayer.cpp, Line 635
L0 Data Zone Capacity set to 1893664 (1CE520h, 3698MB) -> OK, confirmed setting
11:08:07 PM #28 CDR -1205 File DVDPlusDualLayer.cpp, Line 662
Burning Layer 1
11:08:07 PM #29 Text 0 File DVDPlusDualLayer.cpp, Line 672
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
11:08:07 PM #30 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: D04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 44 30 34 00 40 ...CMC.MAG.D04.@
25 25 37 0E 02 20 64 02 - 20 64 18 16 09 08 12 13 %%7...d..d......
01 01 01 20 00 18 16 09 - 08 12 13 01 01 01 20 00 ................
11:08:07 PM #31 Text 0 File DVDR.cpp, Line 6450
Drive: SONY DVD RW AW-Q170A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
11:08:07 PM #32 CDR -1207 File DVDR.cpp, Line 6143
Book Type automatically set to: DVD-ROM
11:08:07 PM #33 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: No
11:08:36 PM #34 SPTI -600 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x066a2000: Len xc
11:08:39 PM #35 SPTI -600 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 13 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06775400: Len x10000
0xB6 DA BF 67 87 0D DF FF C5 54 1C 97 1B 44 40 3E
0x07 80 FC 25 86 52 03 C0 41 06 0F 01 05 7A 64 FE
0xD6 95 A6 C4 CC 32 D7 D6 DF 37 E0 6F 0F BC DF B6
11:08:39 PM #36 CDR -600 File Writer.cpp, Line 278
Device not available
E: SONY DVD RW AW-Q170A
11:08:41 PM #37 SPTI -1114 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
11:08:41 PM #38 SPTI -1033 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 02 8F
11:08:41 PM #39 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders
11:08:51 PM #40 SPTI -600 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x067bcc00: Len x804
11:09:22 PM #41 CDR -1114 File WriterStatus.cpp, Line 161
Reset occurred
E: SONY DVD RW AW-Q170A
11:09:22 PM #42 TRANSFER -24 File WriterStatus.cpp, Line 161
Could not perform end of Disc-at-once
11:09:22 PM #43 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 4x (5,540 KB/s)
11:09:22 PM #44 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed
11:09:22 PM #45 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
If you believe it is the media that is the problem, then change the media make and model. Get some other make of dvd+r and test it.
Sony have lists of compatible media - but your drive is not listed. click here to contact sony or use their tech chat and find out what media you should be using.
I noticed that I couldn't find that make on their website. Any idea why that is? I was trying to get the latest firmware flash and I can't find anything for that model...
Hence why I suggested you contact sony and provided you with a link....
yeah, i sent them an email and just awaiting the response. Thanks again for the help.....
they were no help......I've tried everything. i've tried half a dozen different software so it's not that either. it has to be the hardware. if I could find the firmware for it i'd flash it but apparently the drive is non existent....
Here is what I just got from a Sony Erep..
Welcome 13leafs ...
Connecting to server. Please wait...
Connected to chat.caleris.com
Jerry has joined this session!
Jerry says, Hello, my name is Jerry. May I have your full name and
phone number please?
You say, Dana Drake 9024432351
Jerry says, That drive is OEM.
Jerry says, Original Equipment Manufacturer (OEM) products are not
supported by Sony
. Sony manufacturers and license hardware to compliment other
manufacturer's equipment and is solely bundled as their product.
We would like to be able to provide support for your product,
unfortunately, the product you have is not a Sony supported product.
A portion of Sony's business is producing special products for
manufacturers to install in their systems. We recommend contacting
the vendor directly for technical support or respective OEM that the
product was purchased from. The vendor is familiar with the
modifications on the product and best qualified to provided support.
Jerry says, That drive is designed by a different company and sony
builds it for them and when they buy the drive they sign a contract
that Sony has no ties to the drive. You need to contact the Vender
you bought the drive from for support.
You say, ok thanks. :-(
Jerry says, Thank you for using the Sony Technical Support chat
service. In a few minutes, a transcript of your chat session will be
emailed to the address that you provided at the time of login.
Have a nice day.
new update if anyone is interested. Found out that I could use aw-5170 firmware to update the drive because there is no aw-q170. I'll try to burn tonight and let you know......God this is painful....I also have new configurations from the seller for the nurner so i'll post them as well tonight...
Hmmm... you do know that's at your own risk? Flashing firmware is always risky, using a different firmware riskier still!
Yup, thanks though. I did read up on it first. because it's OEM it doesn't have firmware but the 5170 works. The drive is working much better and I have burned a few vid discs but still having minor issues compared to b4...
Which minor issues are left?
I actually have none now. I ended up updating my drivers for my chipset on my mainboard and voila. End of story.................
Another happy camper!
Thanks very much for your help and conversation. Take it heasy.
13 leafs where did you find that aw- 5170 driver, im still having the same problem
actually it was a firmware upgrade here
http://liggydee.cdfreaks.com/page/en/Optiarc-AD-5170A/
And I started having problems again with mine. Mine was external so i just took it apart and installed internally and now I have zero problems. Try that frimware up grade and you should be good to go. The only thing is uyou will lose and warrenty on your drive so be prepared for it. If you have XP it won't let you install the wrong firmware anyways. On the link there are 4 different firmwares, I downloaded "Dee's AD-5170A 1.02 Modified firmware".
MAKE SURE YOU READ THE INSTRUCTIONS ON HOW TO INSTALL IT. YOU WILL NEED TO BE IN SAFEMODE SO MAKE SURE YOU SAVE THE FILE SOMEHWERE OTHER THAN ON YOUR DESKTOP... Good luck...