Printable View
Hi there,
I've recently been given a Panasonic Toughbook CF-27. I've been running Windows 2000 on it, but I can't seem to find drivers for the sound card and touchscreen. Panasonic only has drivers for Windows 98 and I've been googling for days to no avail.
Any ideas?
Thanks
Hi cj10111 welcome to wd forums.
Try going here, hit the icon next to downloads & put your model number in the appropriate box when the page has revised & you ought to see some bios updates (there's a few depending on just which variety of cf27 you have) & I think the lack of any specific ones that you wanted, means windows is supposed to 'know' .. Applying any bios flashes may well help in this respect, as if windows isn't correctly identifying all the devices (which bios tells it) then it can't 'know' ;)
Thanks. I'll give it a try and post my results.
I didn't get the bios working but I did download the touchscreen and sound drivers from there. They work beautifully. If everything works then do I need to update the bios?
Thanks for the help.
Nope ! :) .. leave 'well enough alone' (if everything is fine don't bother about any bios updates for now) - its my fault for not looking very hard, I didn't see the particular drivers you wanted, so assumed :rolleyes: :knife:, thankfully you did look a bit harder than me :thumbs:Quote:
Originally Posted by cj10111
'no harm, no foul' hopefully applies ;).
Was wondering if you knew of a way to make the touchscreen work with XP, nowhere else does but maybe you do.
Also the speech on a video echoes when i have headphones in, is this a dodgy connection or can i do something about it?
I have checked that it isn't just set up to echo when headphones are in (thought I would check the obvious first!)
Thanks
Tom
I have a solution for touchscreen driver problems with Windows XP. I have a CF-28 (originally with W98SE). Model #CF-28MCFAZEM.
I got a copy of Win Xp Home SP2. Booted from CD, and installed to my C: drive.
I formatted my HD putting just this XP installation to it.
Next I got these drivers : http://www.fujitsu.com/emea/services...ning-0523.html
I also uploaded same file here : http://rapidshare.com/files/69574087...19l41.zip.html
Run TPSETUP.EXE and restart pc.
Your touchscreen should now be active (but inaccurate). Time to calibrate.
In the unzipped files open folder WINXP and open CALWIN.EXE. Using a stylus is best.
Go through that and you should be good to go.
Hope this helps! [email protected] for help.
Welcome to Windrivers deadice and thanks for the tip!
Just remember, if you change your screen resolution you have to calibrate it again!
Quote:
Originally Posted by deadice
That worked great for my CF-27! Thanks. I have come to accept that my touchscreen would never work, but now it does!
Thanks
No prob, hopefully this helps others in the same boat.
Quote:
Originally Posted by K8TEK
Dear All, I have install he fujitsu software in my CF-27, but still can't work. my model is CF-27EJ6K3EE, i don't know if my CF-27 is support for touch screen or not? how to activate the touch screen?
Please help
Thanks
Santoso
Hi to all
I just found a site with all the toughbooks drivers on it.
http://www.produkte.panasonic.de/ser...TR&process=yes
I bough two of them on ebay and had a hard job finding sound driver for win 98.
Tony:)
Well, that didn't work for me, installed drivers, restarted computer then ran the calibration program and nothing happens.............do I have to go into bios and change something?
Welcome to Windrivers talldarkcuban
Exactly what didn't work for you?
By callibration, did you mean for the touch screen?
What windows are you using?
I currently had a toughbook model cf 18 repaired and had windows xp installed on it. Since then I can not get my speaker to work or my touchscreen to work. Can some one please help me. (keep in mind i don't know a whole lot about computers)
Welcome to Windrivers rek4has
go here and register. You will then be able to download the drivers you need.
Once you have downloaded the drivers, post again for help installing them - but usually all you have to do is save the file to a folder you can find again, and when it's finished downloading, double click the file and it will install.
You can find CF-27 drivers here,
http://www.toughbookdrivers.com/drivers/cf-27/
Some really great information here. Thanks to everyone who posted CF-27 driver links. Now I have a CF-27. with XP and a touchscreen. ;)
Welcome to Windrivers wasp61, I'm glad this thread helped... post again if you need any other help.
Hi guys,
I'll apologise up front for bumping this old thread but I just got my hands on my first Toughbook.
I was very interested to hear that some people have Win 2000 and even win XP running on these laptops and I got all excited at the idea of updating mine from win 98SE to XP pro but then reality chipped in with, "I wonder which version of the Toughbook CF-27 these guys were using?". I'll bet my last penny it isn't a CF-27 running a P11 chip @300 MHz and 320 RAM like mine.
Anyway, many thanks for the links to Toughbook drivers.
Steve
Hello Teapot - you might find this interesting reading;
http://forum.notebookreview.com/showthread.php?t=225336
Hi, CCT and thanks for a very interesting and useful link.
I guess I'll stop at Win 2K pro, lol