Need help with a power issue.
Results 1 to 4 of 4

Thread: Need help with a power issue.

  1. #1
    Junior Member
    Join Date
    May 2001
    Location
    Long Beach
    Posts
    1

    Post Need help with a power issue.

    My power supply does not power up anything...and I just bought it.???

  2. #2
    Registered User
    Join Date
    May 2001
    Location
    Kansas
    Posts
    5

    Post

    Check the switch on the back of the power supply, make sure it is fully switched over to 115(110,120). Flip it to 220(230, 240) and back. If that doesn't work check the fuse and see if it was blown, and remember!
    New doesn't mean it works! Try a different one!

  3. #3
    Registered User trinitro's Avatar
    Join Date
    Apr 2001
    Location
    Illinois
    Posts
    175

    Post

    Is it an ATX supply? If it is, make sure the switch on the back is on. Also make sure that the case power switch that goes to the MB is connected where it's supposed to. You can also try shorting the two pins on the MB to start it up. If it is AT, make sure the switch is good. If everything fails then you can always return it and replace it.

  4. #4
    Registered User Ruslan's Avatar
    Join Date
    Jun 2000
    Location
    Toronto,Ontario,Canada
    Posts
    2,479

    Post

    addition to said above:
    Disconnect PSU from all devices.
    If it ATX PSU, short green (pin no.4)and any of black wires contacts. PSU should start. If not - return power supply back.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •