-
November 12th, 2001, 09:16 PM
#1
Registered User
Drivers for a Mobo who's company went under
sdunlimited
Member posted 11-09-2001 06:31 PM
--------------------------------------------------------------------------------
Hello,
In a desperate attempt to save a couple of dollas before upgrading, I've been trying to find some company who may support drivers for a Vigor VG5C-Pa motherboard that was produced by the now defunct Catery Technology Corp. If anyone has some info. on where I can go or what I can do to update this motherboard, it would be appreciated.
Thanks!
----------------------------------------------------------------------------------------------------
I ran across this while searching for a driver, I would like very much to help him. Can anyone help him out, as all of my searches thus far have been fruitless?
SlyVenom
BTW I found it here http://www.driverzone.com/ubb/Forum4/HTML/000257.html
-
November 13th, 2001, 05:34 PM
#2
Registered User
Not sure if this will work, but it's the only thing I could find
http://www.suredeals.com/spec_sheets/drivers.html
-
November 13th, 2001, 08:26 PM
#3
Registered User
I couldn't access the site.
Thanx for trying though
I didn't have much better luck
-
November 21st, 2001, 03:31 PM
#4
Geezer
I like it! Are internet.ripoff paying you to recruit?
Anyways I don't think these have gone bust they make routers and bridges and stuff like that. Try here http://www.lmtcs.com/lmtshoplmt.htm and see if you can track it down from there.
-
November 23rd, 2001, 02:46 AM
#5
Check your mail for the bios update. There's nothing else out there for that board though...
-
November 23rd, 2001, 10:47 AM
#6
Registered User
Thank You Chipzilla, I appreciate all the help.
Hope This is OK to Write, but..
I did post it to driverguide (which is where windrivers use to search when it didn't find a driver so I don't think I'm out of line by putting this here) I didn't post the link however.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks