-
March 28th, 2002, 03:36 PM
#1
Cable modem help plz!!!!!
I have a cable modem, with 2 pc's both with Nic's. Is it true that if i put a hub between the modem and the two pc's, that the MAC address that's registered with the provider changes. IE does a hub have a MAC address...
I am trying basically trying to get both pc's onto the net via the cable modem, without having to have one permantly powered and the other
slaved off it...
Any help guy's/gals
Cheers in advance
##~FlashY~##
-
March 28th, 2002, 03:56 PM
#2
Registered User
You don't need a hub...you need a router. That way, you will have an IP address for the router and it will assign its on IPs to your computers allowing them to share the connection. Once you have it, you won't even need to notify your ISP so they won't charge you for having two computers on one account.
Note: To correct display problems, hold the "ALT"key and press"F4".
-
March 28th, 2002, 04:11 PM
#3
Thankz for the info Gameguru
Can you recommend a small router, and the patch cables am i right in saying i will need all to be pin-to-pin not the crossover type...
Cheers once again
##~FlashY~##
-
March 28th, 2002, 05:08 PM
#4
Registered User
I don't know if they ship to the UK but you should look for a similar product there.
<a href="http://www.comready.com/adadex4por10.html" target="_blank">web page</a>
This is exactly what you need....just make sure to shop around a bit so you won't get ripped off by a quick salesperson.
Note: To correct display problems, hold the "ALT"key and press"F4".
-
March 29th, 2002, 07:44 AM
#5
D-Link makes a router that also acts as a print server (Model# DI-704P). With the networked printer, you can have both workstations printing to one printer. Router also acts as a firewall to keep others (people in your community)from browesing your network. <a href="http://www.dlink.com/products/broadband/di704p/" target="_blank">http://www.dlink.com/products/broadband/di704p/</a>
hope this helps....Born
If yea turnem upsidedown they all look the same!
-
March 29th, 2002, 08:41 AM
#6
Registered User
D-Link or Linksys would be the way to go. I havew never been disapointed by either one of em.
-
March 29th, 2002, 09:03 AM
#7
Registered User
[quote]Originally posted by BornOnFire:
<strong>D-Link makes a router that also acts as a print server (Model# DI-704P). With the networked printer, you can have both workstations printing to one printer. Router also acts as a firewall to keep others (people in your community)from browesing your network. <a href="http://www.dlink.com/products/broadband/di704p/" target="_blank">http://www.dlink.com/products/broadband/di704p/</a>
hope this helps....Born</strong><hr></blockquote>
I'd go with the dlink. Very simple to setup and you can mask it's mac address to show as the mac address for the nic that is registered with the ISP. If you don't need the print server Just get the 704. Best buy has it for like 30 bucks (after rebates).
"I feel like one of those mass murderers on death row. I never understood how the hell they got more chicks than I did. Now I know. They sold crap on eBay." -- Anonymous ebayer
"I figured out what's wrong with life: it's other people." -- Dilbert
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks