-
June 13th, 2005, 01:08 PM
#1
Nec ND6500A wont read blank dvd's
When I go into my computer it says the capacity of the blank dvds is 0, I have burned with these type of blank dvd's in the past with no problems and it will burn cds, and play dvds but it doesn't seem to like blank dvd's now, Im running windows xp home with service pack2 and I posted some info from nero infotool below, if you need any other info I will try and provide it. So if you have any suggestions they will be greatfully recieved.
Drive Information
------------------
Drive : _NEC DVD+-RW ND-6500A
Type : DVD±R/RW DL Recorder
Firmware Version : 2.24
Buffer Size : 2 MB
Date : ?
Drive Letter : D:\
Location : 1:0
Mechanism : Tray
Read Speed : 10 X
Write Speed : 31 , 18 X
Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : Yes
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes
Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD-R DL : No
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : Yes
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Buffer Underrun Protection : Yes
Mount Rainier : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
Region Protection Control : RPC II
Region : 2
Changes User : 4
Changes Vendor : 4
Disc Information (D:\)
-------------------
Type : Blank DVD+R
Interface Information
---------------------
Adapter 1
---------
Description : Primary IDE Channel
Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: TOSHIBA MK6021GAS
Type : Disk Drive
DMA : On
Adapter 2
---------
Description : Secondary IDE Channel
Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: _NEC DVD+-RW ND-6500A
Type : CD-Rom Drive
DMA : On
Autorun : On
ASPI Information
----------------
System ASPI : ASPI is not installed
Nero ASPI : ASPI is installed and working properly
WNASPI32.DLL : 2.0.1.74 164112 bytes October 26, 2004
Installed OS Patches
--------------------
(Q810090) USB Update : Yes
(Q329112) Multi-Border DVD with More Than 4 GB of Data Not Readable Past First Border : Yes
(Q812415) Problems with Multiple ATA devices : No
(Q322359) Intelide.sys Is Not Used on Computers with ICH4 or ICH5 : No
(Q320174) IMAPI Update - CDs recorded have missing files or errors : Yes
(Q311542) Devices May not power up properly when resuming from standby : Yes
(Q327086) Data Added to Removable Media During Hibernation May Be Lost When You Resume Windows XP : Yes
(Q308374) Ricoh 1394 Controller May Not Work with Windows XP : Yes
(Q314634) Windows XP Does Not Detect Your New USB Device : Yes
(Q822603) USB 1.1 and USB 2.0 update : No
(Q323507) Your IEEE 1394 or USB CD-ROM or DVD-ROM Drive May Not Be Recognized in Windows XP : No
(Q815834) 'Code 28' Error Message and a Yellow Exclamation Mark Next to a USB Device in Device Manager After Your Computer Resumes from Hibernation : No
(Q316575) Problems When You Swap a CD-ROM During Hibernation in Windows XP : No
(Q811789) Surprise Removal of 1394 Device Can Cause Bluescreen Error : Yes
(Q323322) Cannot Use Sony VAIO PCG-C1MRX Internal Camera with Windows Messenger After You Apply Q316397 : No
(Q811789) Surprise Removal of 1394 Device Can Cause Bluescreen Error : Yes
Last edited by Light; June 19th, 2005 at 06:24 AM.
-
June 27th, 2005, 04:59 AM
#2
Geezer
Welcome to wd forums Light .
So nero seems confus-ed ! ..
Disc Information (D:\)
-------------------
Type : Blank DVD+R ....
..Attached Devices
Description : Master: _NEC DVD+-RW ND-6500A
Type : CD-Rom Drive ..
Most especially if you consider it isn't recognising blank dvd's !
Have you tried adding/ removing nero ? & do you use anything else for burning that might add what's called a 'class filter driver' ? (If you aren't sure read the 'sticky' in this forum, there's advice there if you do )
Similar Threads
-
By thedizzyone in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 8
Last Post: August 9th, 2004, 10:38 AM
-
By bmb0704 in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 2
Last Post: July 30th, 2004, 07:54 AM
-
By Miicha in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 3
Last Post: March 7th, 2004, 02:41 PM
-
By tooneyville in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 7
Last Post: November 2nd, 2003, 06:29 AM
-
By DarkDessertion in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 6
Last Post: October 6th, 2001, 02:00 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks