-
January 31st, 2006, 06:31 AM
#1
Hard Drive Issues
Well I brought a 160 IDE Western Digital Hard Drive, all seemed to be working until I reformatted the Primary Drive (8 Gig). Then all of a sudden the 160 Gig Hard Drive wouldn't work, fdisk doesnt pick it up so I cant reformat it but the BIOS does pick it up with the correct numbers as Cylinder..... Alright when I connect the drive as a slave with the correct jumper setting and crap it comes up with this in Device Manager:
(Red Cross) Generic IDE Disk Type 47 - This is a red cross because the following driver ain't working.
(Yellow Negetive Sign) Primary IDE Controller (Dual Fifo) - Now would this be the driver? Because under this same driver the hard drive has worked previously.
BTW, I'm running Windows 98SE, 8 Gig Drive as Master, 160 Gig NOT WORKING as Slave, 256 RAM, Geforce 6200, AMD Sempron 2600 and a K8MM-V Motherboard. Yes the two drives are on the same channel. Please someone help me otherwise I'm pretty much screwed.
Similar Threads
-
By swamprat in forum Tech Tips
Replies: 2
Last Post: March 1st, 2005, 06:39 AM
-
By spinnindisc in forum Removable/Backup Device Drivers
Replies: 5
Last Post: February 11th, 2005, 01:13 PM
-
By groundzero in forum Tech-To-Tech
Replies: 4
Last Post: July 29th, 2003, 01:34 PM
-
By DiR[ëctory] in forum BIOS/Motherboard Drivers
Replies: 20
Last Post: October 3rd, 2002, 05:16 PM
-
By CKTONG in forum Windows 95/98/98SE/ME
Replies: 2
Last Post: April 1st, 2000, 11:19 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks