Incomplete raid set!

[simplesolution]

si3112r.sys Driver IRQL not less or equal this is the error reported. I have already done a rebuild of the mirrored drive & the error went away for about four reboots I am able to boot to safe mode & get on the internet but when I boot in normal mode the desktop comes up for a few seconds then the error is reported. I dont think the drive on raid 1 is bad but your opinions do help. I already defragged the drive did system restore & ran Adaware!

[CCT]

Since Safe Mode boots the basic OS drivers, and you can boot to Safe Mode with Networking without problems, I would think that some of your other boot drivers/programs are causing your problems.

Thus, in safe Mode, change the startup lineup and slowly add one at a time until you get gerfunkled again.

Or something to that effect.

[slgrieb]

si3112r.sys is a Silicon Imagine driver file, so most likely the file is either corrupt, the wrong version for your controller, or just a bad driver. More info about your hardware (particularly) the controller would be nice.Maybe even more info about the OS on the machine. You know, sorta the basics.

[simplesolution]

OS is Windows XP Pro. AMD Athlon XP 1.75Ghz 1.00 Gb ram 2-120gb Samsung SP1213C on raid 0+1 raid 1 drive does not appear in "my computer" after booting to the desktop. Mobo is ASUS A7N8X-E Case is a custom from Valley computer. The controller is Silicon Image SiI 3112 SATARAID Thanks!

[CCT]

" 2-120gb Samsung SP1213C on raid 0+1 raid 1 drive does not appear in "my computer" after booting to the desktop"

If you used some punctuation it might be easier to understand what you are typing.

Raid 0 settups WILL NOT SHOW 2 DRIVES!

By its' nature, Raid 0 combines both drives as 1 and writes to both so they show as 1 drive in My Computer.

http://www.smartcomputing.com/editor...rticleID=31035

http://support.intel.com/support/chi.../cs-009328.htm

http://techreport.com/reviews/2005q1...d/index.x?pg=1