-
October 7th, 2008, 09:14 AM
#1
Cisco ASA Firewall Config
Hi all!
This Firewall is starting to tick me off!
I have the two interfaces setup and configured, and enabled.
Outside is setup with one of my external IP's from my external address pool.
Inside is setup with the proper IP/Subnet pair etc.
default route setup on the outside to go for any 0.0.0.0/0.0.0.0 to the IP of the ADSL Router.
ACL is setup to allow IP traffic from any/any ip permit on the INSIDE interface.
Am I missing something??? I cannot get out to the internet.
"Knowledge belongs in the hands of the people"
-
October 7th, 2008, 09:29 AM
#2
Driver Terrier
Opened port 80? (NooNoo ducks)...
Nat working?
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
October 7th, 2008, 09:58 AM
#3
I'm not sure, traffic seems to get stopped at the NAT rule.
"Knowledge belongs in the hands of the people"
-
October 8th, 2008, 01:45 PM
#4
Have you enabled NAT/PAT? The following command will setup PAT using the IP address of the Outside interface;
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
-
October 10th, 2008, 08:05 AM
#5
I ended up contacting Cisco and using my SmartNet support...what a wonderful thing! lol
"Knowledge belongs in the hands of the people"
-
October 10th, 2008, 08:57 AM
#6
Driver Terrier
And what was the problem then? Missing a . somewhere?
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
October 10th, 2008, 09:43 AM
#7
I missed something in one of the ACL rules.
"Knowledge belongs in the hands of the people"
-
October 10th, 2008, 10:51 AM
#8
Driver Terrier
Thanks. Glad it's sorted.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
Similar Threads
-
By esnetsc in forum Networking
Replies: 3
Last Post: August 11th, 2005, 02:29 PM
-
By TCPIP007 in forum Spyware & Antivirus - Security
Replies: 2
Last Post: July 14th, 2003, 10:09 PM
-
By ilovetheusers in forum Tech Lounge & Tales
Replies: 6
Last Post: July 23rd, 2002, 03:04 PM
-
By SCHTUDE in forum Networking
Replies: 3
Last Post: April 25th, 2002, 10:46 AM
-
By drewber in forum Networking
Replies: 3
Last Post: July 2nd, 2001, 07:44 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks