4GB Ram

[futuretech]

I am trying to change Ram on a P5N32-E SLI plus board.
I can post and run fine on 4GB ddr2 533 Ram but want to change it out to 4 GB DDR2 800.
I can put in 2 sticks and it boots fine but nothing when i fill all 4 slots.
I have tried setting the specs manually for the Ram in the BIOS but no go (but then again i might be doing it wrong i usually just leave it at BIOS defaults)
The RAM should be set [email protected]
The board itself is supposed to run that voltage by default.
Has anyone ever managed to get this model board to see and run with DDR2 800?

[CCT]

A method that apparently worked;

http://74.125.93.132/search?q=cache:...&ct=clnk&gl=ca

[slgrieb]

Patriot is excellent RAM. Another thing you might try before you dump your current memory is manually raising the voltage to say 1.9 and see if that helps. On some boards you have to run the memory slightly over voltage if all 4 slots are populated.