-
March 30th, 2014, 11:33 AM
#1
Registered User
Net working problem
We have a belkin router downstairs, Android tablet has issues. When we look at available providers belkin shows up excellent signal, put in pass word, signal drops to poor signal and goes to authenticating and to hooked up and then drops out on where you select providers back and forth. I took it upstairs to my Netgear router, hooked up and stayed on. All routers have wp2. Down stairs sitting next to me was a laptop accessing internet with Belkin with no problems. I am going downstairs with Dell tablet and check it out. I am all ears
went with windows 8 on Dell tablet all is good. I did reset Andriod tablet twice, still same problem at top of my post
Last edited by xpuser357; March 30th, 2014 at 11:48 AM.
Reason: adding
Last thing I remember, running for the door,
I had to find the passage back to the place
I was before.
-
March 30th, 2014, 12:40 PM
#2
Registered User
Are these two routers set to different channels? Why do you need two routers?
Sergeant WOTPP
-
March 30th, 2014, 03:43 PM
#3
Registered User
Originally Posted by MobilePCPhysician
Are these two routers set to different channels? Why do you need two routers?
We have always`s had wired downstairs and wireless upstairs so lap tops that arrive here or our own do not need cat 5 cable tripping on long length cable. Awhile back downstairs router died So I bought same as up stairs N300 wireless Netgear. We have no problems with any device also The Android tablet works on them. There is in the system where there is another pc behind concrete wall 12 inches thick which is a add on to this house .So to have wireless there we purchased the Belkin. It first did not connect so I brought my windows 8 laptop and got on belkin and downloaded update updated router now everything works. There is no problem with any device except android tablet. Where this desk top behind concrete wall is one of the original 5 on first non wireless.
Last edited by xpuser357; March 30th, 2014 at 06:12 PM.
Last thing I remember, running for the door,
I had to find the passage back to the place
I was before.
-
March 31st, 2014, 12:29 PM
#4
Registered User
I have seen few weird issued with Belkin.
Try to manually add the network, that is add the SSID and encryption manually.
Also make sure that you don't have 2 DHCP servers in the network.
Protected by Glock. Don't mess with me!
-
April 1st, 2014, 09:29 PM
#5
Registered User
Originally Posted by CeeBee
I have seen few weird issued with Belkin.
Try to manually add the network, that is add the SSID and encryption manually.
Also make sure that you don't have 2 DHCP servers in the network.
Thank you CeeBee I read up on Dynamic host Configuration Protocol and TCP/IP I need to study on That since I have a network. I have Malware Bytes I thought, why would all other devices worked why not Android tablet. Hooked it up to my computer and ran malware bytes It found a pup. Deleted it and now no problems device connects
Last thing I remember, running for the door,
I had to find the passage back to the place
I was before.
Similar Threads
-
By TRICKPLAYER in forum Windows 7
Replies: 4
Last Post: January 6th, 2010, 12:03 PM
-
By lang1 in forum Tech-To-Tech
Replies: 13
Last Post: November 18th, 2005, 03:34 PM
-
By unknownperson in forum BIOS/Motherboard Drivers
Replies: 5
Last Post: February 26th, 2005, 03:37 AM
-
By cmg214 in forum Networking
Replies: 6
Last Post: September 28th, 2004, 11:28 AM
-
By redthrees200_10 in forum USB/Firewire
Replies: 5
Last Post: July 20th, 2003, 08:30 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks