|
-
January 3rd, 2002, 05:31 PM
#1
 Raid Question
This might be the wrong place to post this but I will start here. I have a 1.2GHZ AMD TB on anAbit KT7A Raid MB set up with two seagate 7200rpm ata100 40 Gb drives in a 0 raid setup running Win 2K. All seems to work ok (and fast) but I checked out event viewer and I have an error each time I boot up that states "The device, \Device\Scsi\HPT3xxNT1, did not respond within the timeout period." This raid is my boot drive as I know some use a seperate drive. I set my stripe size to 32k during my raid setup. Am I missing something here? I believe I have the latest drivers loaded.
-
January 4th, 2002, 07:08 PM
#2
Registered User
I wouldn't worry about it for now, but next time, set the block size to default NTFS (4096, or 4k)
-
January 4th, 2002, 10:05 PM
#3
Registered User
[quote]I wouldn't worry about it for now, but next time, set the block size to default NTFS (4096, or 4k) <hr></blockquote>
He isn't talking about block size....he's talking about his stripe size for his raid.
You need to try to get the latest HPT drivers from their <a href="http://www.highpoint-tech.com/370drivers_down.htm" target="_blank">web page</a>.
I think you are running the NT drivers and you need to be using Win2k/XP drivers. D/L the one with a red *.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
Bookmarks