Samsung - SH-W162C dvd buring errors.

**Blasko** · November 17th, 2005, 10:01 PM

Hello just registered to see if anyone could help me out.
I've read some posts with same problems, tried every fix suggested, still no luck.

I bought a Samsung: SH-W162C DVD burner,
few of my problems:

1: when updateing firmware, i get error "Flash cmd fail!!" the drive came with 09 on it (tried to get to 10). so i'm not sure if i really need to worry about that now

2: when burning (nero express 6.6.0.15 that came with drive) i get "Buffer too large" (i have a log file if anyone wants too see that)

I can burn CD-R's fine. those errors above are for DVD-R's.

my system:

OS: windows xp SP2
mobo: Chaintech 7NJS Ultra Zenith (with updated nvidia chip drivers)
4 hard drives: 2 with IDE cables (80 gig, 100 gig) and 2 with serial ata (80 gig, 120 gig)
1 dvd burner/ master /ide. (the drive im asking about)

Ive tried to set the drives to DMA mode, with no luck. in my bios everything that says DMA is enabled, and the PIO are on auto. no disable, only Mode 1-4
also i cant change the modes within windows (no advanced tab, like noted in other posts ive read)

[part of nero log]
=== Scsi-Device-Map ===
DiskPeripheral : Promise 1+0 Stripe/RAID01.10 fasttx2k Port 0 ID 0 DMA: Off
DiskPeripheral : Promise 1+0 Stripe/RAID01.10 fasttx2k Port 0 ID 1 DMA: Off
DiskPeripheral : ST380013A 3.06 nvidesm Port 1 ID 0 DMA: Off
DiskPeripheral : WDC WD1000BB-00CAA1 17.0 nvidesm Port 1 ID 1 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-W162CTS09 nvidesm Port 2 ID 0 DMA: Off

----------------------------
so the DMA is off for sure. not sure what to do now. all my hard drives are full as hell. want to clean some of it up, and i want to avoid using 500 or whatever CD-R's.

**confus-ed** · November 18th, 2005, 06:03 AM

Hi blasko, welcome to windrivers.

So ... mmmmmm ! Sata & pata present often spells trouble & most especially with Nvidia chipset boards

First thing to try is to stop the ide connections being 'nvidia something' & change them back into 'microsoft something' - this is tricky to describe, but in device manager, under disk controllers, you ought to be able to find two or more entries (depending on how many sata controllers are enabled/present in the bios) .. it'll look a bit like this -

& we want it to look like this:-

(both pictures are actually nicked from an nforce 2 chipset explanation, but same idea & near enough for illustration

)

Nvidia IDE drivers== faster, but issues like this ('eventually' either improved drivers or newer bios will fix this, but not right now it won't !)
Microsoft IDE drivers==more reliable & less 'fussy'

**Blasko** · November 18th, 2005, 11:48 AM

well hot damn, that worked. only took me 4 hours to get it working. but it worked. problem i was having was when i changed it to the primary ide control it was saying there was to many devices, and i could see 2 of my drives (s-ata ones), BUT i could burn dvds at that time. but didnt help be only seeing 2 of my drives, and 2 missing, my computer hasnt restarted that much in ages.

so eventualy after the restarts and autofinding the IDE controllers and installing them, it fixed itself. Now all my drives have the DMA and PIO option, and everything works perfect, Burning a DVD as i type. woohoo.

Thank you very much for your help. I would have never thought that the nforce drivers would have messed it up, i figured updating them would help.
Thanks again.

**confus-ed** · November 18th, 2005, 12:57 PM

Lovely

**Tamie-tam** · July 17th, 2007, 09:17 AM

oki heya guys i have kinda a very similar program i have the same dvd burner that came with the 09 firmware that am trying to upgrade to 11 but when i do it through the sfdnwin.exe i always get a error saying "flash cmd fail"

i can normaly burn cd's and read dvd's and cd's but burning dvd's always comes up with the error....

i dunno what to do to fix this any more

am not that good in computers ( a blond gurl here lol ) so if anyone could help me i would need a step by step tutorial or at least as much info as posible on how to fix the problem
if it helps this is the screencap of my system device manager : http://img410.imageshack.us/img410/6...pedmeeeun8.jpg (win xp sp 2) ( i messed it up tho cause i tried messing with the Primary BM Ultra dma channel and when i did it kinda disapeared and , well it's not there any more *dies of shame* from what i think i noticed.. it went down somewhere into the umm scsi and raid controllers after i tried updating the driver .... *probably a huuuge mistake*

i need help guys... my pc is crashing i have to reinstall my windows and i have no way of saving all my thingies if i cant burn them on dvd's

please smn help me out

**NooNoo** · July 17th, 2007, 12:28 PM

Welcome to Windrivers Tamie-tam

First thing we need to know is what is the make and model of the computer and then we can get started.

**Tamie-tam** · July 17th, 2007, 01:34 PM

Originally Posted by NooNoo

Welcome to Windrivers Tamie-tam

First thing we need to know is what is the make and model of the computer and then we can get started.

thank you for the welcome...
well as i said i dunno much about computers but i found this: (i hope thats it)

Intel(R)
Celeron(R) CPU 1.80 GHz
1.79 Ghz, 480 MB of RAM

ok and i got aida32 so i hope the thingies there are enough info :

mother board: sapphire axion A4
chipset on the motherboard: ATI radeon igp 340
system memory : 480 mb (ddr sdram)
typ of bios: award (01/06/03)

hard drives:

ST310212 A SCSI Disk Device (10 GB, 5400 RPM, Ultra-ATA/66
ST340211 1A SCSI Disc Device (40 GB)

and ive got a cd burner
and a dvd burner... the dvd burner is the same samsung model as in the topic tittle ....its the 1 am asking about

ok i dunno is this enough? do u need anything more?
oh and offcourse thank you for taking the time to reply

**NooNoo** · July 17th, 2007, 03:53 PM

ok, you managed to have a board that is on the unusual side, meaning it's tough to find updates for. The one site that has what you need is currently down. Do you have the driver disk that came with the motherboard at all?

**Tamie-tam** · July 17th, 2007, 04:01 PM

not the original , i bought this pc like umm a long time ago through some guy but at 1 point i took the pc to a repair shop and there they gave me a cd and on it its written : sapphire tech main board driver... from the sound of it that could be it?

**NooNoo** · July 17th, 2007, 04:20 PM

Bingo!

Brilliant. Let's hope the cd works... put in the drive and see if you can find a file called setup.exe. If you can, double click it to run it. Follow the wizard to install it and then reboot if it doesn't ask you to.

On the scsi stuff, you have a program called cloneDVD? Please for the moment, uninstall it from add/remove programs - that should remove the virtual dvd drive and the scsi drivers. Reboot and drive your DVD again (not the firmware upgrade, just the drive functions). If it does work, then have a go with the firmware update.

**NooNoo** · July 17th, 2007, 04:26 PM

oh and if pcpartner ever comes back up here is the driver page for your motherboard

**Tamie-tam** · July 17th, 2007, 04:34 PM

oki i'll go do all of it and be back with the results
and a massive thank you even just for the will to help

**NooNoo** · July 17th, 2007, 04:58 PM

ok, will be back on in 9 hours or so.

**Tamie-tam** · July 18th, 2007, 06:43 AM

ok now this is what i did :

uninstalled clonecd then installed the mother board drivers and restarted ..

this is where i stoped and dunno what next...

i tried using the dvd burner again it doesnt work nero gave me out this error log:

nero error log

and my current device manager looks like this now:

now i need a slow step by step run through cause i dunno how to do anything else when it comes to this...

i tried updating the firmware too... same error appeares

i think am too dumb for this

**NooNoo** · July 18th, 2007, 10:57 AM

not too dumb, you just have a bit of a tangle and sorting it out is going to take some patience.

You need to go into safe mode and remove the two disk drives from device manager. Then reboot.
Do you know how many disk drives you actually have?