Promise FastTrak Lite controller RAID
Results 1 to 2 of 2

Thread: Promise FastTrak Lite controller RAID

  1. #1
    Junior Member
    Join Date
    Aug 2001
    Posts
    4

    Post Promise FastTrak Lite controller RAID

    Hi,

    I have purchased a GA-7DXR motherboard.

    I am currently trying to operate it in a RAID 0 array with 2 X 40Gig IBM
    deskstar drives.

    I find that I am unable to install windows 2000 on it and consistently
    get the error..

    File \Win2000\Ultra.sys caused and unexpected error(18) at Line 1211 in
    D:\nt\private\ntos\boot\setup\oemdisk.c

    It did however install successfully with Windows98.

    I am currently following the procedure as described in the manual...


    Setup a stripe array using the FastTrak Lite utility. - Successful

    Used fdisk to create a ~80Gig partition - Successful

    Formatted the partition with format FAT32 system - Successful

    Rebooted the system with Windows2000 disk and booted from the CD -
    Successful

    When setup asks "if 3rd party RAID or SCSI drivers are to be installed
    push F6", F6 is pushed.- Successful

    When windows asks to place the relevant disk in the floppy drive and
    push S - Successful

    --I did place the relevant drivers on the floppy from the CD as
    described in the manual.

    Windows then asks which driver I wish to install.

    I select the Windows2000 FastTrak-Lite Controller Driver


    I then get the error as detailed above.

    I would greatly appreciate any assistance that anyone could provide.

  2. #2
    Registered User
    Join Date
    Oct 1999
    Location
    Clackamas, OR USA
    Posts
    5,422

    Post

    Please do not post the same problem in more than one forum. Topic continued at:

    <a href="http://forums.windrivers.com/cgi-bin/forum3/ultimatebb.cgi?ubb=get_topic;f=3;t=001009" target="_blank">http://forums.windrivers.com/cgi-bin/forum3/ultimatebb.cgi?ubb=get_topic;f=3;t=001009</a>

    Topic Closed.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •