Well i got a nice new antec "dragon" case ( 1030b )

I switched all of my components to the new case ( care-fully ) making sure to touch the PS every once and a while too.

here's the problem I can't get a video signal from the MOFO now. <IMG SRC="smilies/mad.gif" border="0">

I was careful to put alot of standoffs and made sure the motherboard was suspended in the case.

I'm thinking the AGP contacts may be mis-alligned or something because the fan on my geforce 2 ultra still turns on.

I tried the ol' pencil erasor trick on the contacts on the graphics board but.. no luck.

I have also tried 2 other agp cards as well.

This is an ABIT VP6 running (2) pentium III 1ghz procs running under win2kpro by the way.

any suggestions are apreciated , thank you.