My church has a issue, we have 2 routers, one is a Actiontec DSL router, the other is a Belkin Pre-N MIMO wireless router.

The Actiontec is connected to my dsl line and handles my DHCP server functions. While my Belkin is just for wireless connection to the network.

Now I need to get one of the computers on the wireless connection to use PCAnywhere 11.5.

Network is setup like so:
Actiontec 192.168.0.1
Belkin 192.168.0.103
Computer 192.168.0.11

Now, I go into the Actiontec and tell it to forward 5631 TCP and 5632 UDP to 192.168.0.11 like Symantec says.

Use telnet to go to my outside IP: Open xx.xx.xx.xx 5631
Nothing.

Then I go into the Belkin and tell it to forward those same ports to 192.168.0.11.

Go back into Telnet try again. Nothing.

Try putting 192.168.0.11 into DMZ in the Actiontec, nothing. Do it in the Belkin as well, nothing.

Try forwarding the ports in the actiontec to the Belkins IP then in the Belkin it forwards it to the .11. Nothing.

I am really stuck and don't know what to do.

Anybody tried using pcanywhere behind 2 routers like this and got it working?

Thanks,
Stoney