-
May 25th, 2006, 03:28 PM
#1
cascading linksys routers
I have a cable modem connected to a befsr41 connected to a wrt54g that is enhanced with a wre54g.
The routers are connected on port 2. the cable modem goes into the wan receptor on the befsr41.
dhcp is disabled on the wrt54g and is enabled on the befsr41. Both routers are set to gateway.
Here's my question. I'm thinking of replacing both routers with a new pre N router. I think the added range might solve my problem. However, I've read that for the pre n routers to deliver at the high end of their technical range you also have to use N adapters in you laptop and desk top.
So, what happens if you do that and you also try to use the wre54g expander. Will you get the enhanced N standard expanded or will you take the whole thing down to the G standard range?
Similar Threads
-
By SirWise in forum Networking
Replies: 9
Last Post: March 15th, 2006, 11:30 AM
-
By techs in forum Tech-To-Tech
Replies: 1
Last Post: November 5th, 2005, 11:18 AM
-
By Missing.Digit in forum Networking
Replies: 5
Last Post: January 10th, 2003, 09:06 AM
-
By stevenf13 in forum Networking
Replies: 1
Last Post: August 20th, 2001, 05:50 AM
-
By gren in forum Networking
Replies: 8
Last Post: April 21st, 2001, 02:28 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks