-
April 11th, 2007, 09:10 AM
#1
New Gigabyte mobo wont detect hdd's.
Hello,
Ive just helped a mate upgrade his old pc with a new mobo.
The mobo is a Gigabyte GA-8VM800PMD-775. It boots up but will not detect any of the 2 ata hdd's that are connected to it.
It does detect the optical drives though.
Ive tried swapping the ide cable and also swapping over to the ide channel the optical drives were on.
I also unplugged everything but one drive in case it was lack of power but still no luck. Besides that the manual suggests a 300watt supply and this is a 350 anyway.
Any suggestions as to what the problem could be would be most welcome.
Similar Threads
-
By Bintaur1 in forum BIOS/Motherboard Drivers
Replies: 3
Last Post: October 24th, 2005, 08:05 AM
-
By mvonair in forum BIOS/Motherboard Drivers
Replies: 8
Last Post: July 11th, 2005, 05:23 AM
-
By sethfp in forum BIOS/Motherboard Drivers
Replies: 4
Last Post: August 25th, 2004, 06:29 AM
-
By buksida in forum BIOS/Motherboard Drivers
Replies: 1
Last Post: February 20th, 2002, 10:58 PM
-
By Jallentino in forum Tech-To-Tech
Replies: 7
Last Post: April 3rd, 2001, 09:19 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks