-
April 9th, 2008, 08:19 PM
#1
Registered User
Adding a 3rd Hard Drive to a Dell Precision 650 Workstation
One of my old 37GB Seagate Cheetah SCSI drives died last week in my system. It was one of two drives in my system.
I finally got a replacement...two replacements, actually...identical Fujitsu MBA3147NP 147GB U320 SCSI drives...one to replace the dead Cheetah, and a second as a dedicated back-up drive.
When I plug either drive into the system, the system boots normally, the LSI Logic SCSI Adapter scans for the drives, and everything starts perfectly. When I add the third drive into the system, it gives a "device not found" error during initialization, and neither drive is seen. What could I be doing wrong? I can't think of what to do next.
BTW, the LSI Logic controller's software is set to disable RAID functionality (it was orignally set as enabled). That didn't change anything. It still doesn't work.
Help!
Spaceman Spiff sets his blaster to frappé...
Similar Threads
-
Replies: 1
Last Post: December 22nd, 2005, 06:34 AM
-
By billwil in forum BIOS/Motherboard Drivers
Replies: 4
Last Post: September 16th, 2005, 10:46 PM
-
By TheCardMan in forum Hard Drive/IDE/SCSI Drivers
Replies: 25
Last Post: March 7th, 2005, 07:50 PM
-
By The Real SlyVenom in forum Tech-To-Tech
Replies: 5
Last Post: October 6th, 2001, 10:26 PM
-
By penguinAHA in forum Hard Drive/IDE/SCSI Drivers
Replies: 1
Last Post: May 3rd, 2001, 01:11 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks