-
March 2nd, 2002, 09:52 AM
#1
Registered User
CD-rw is unable to write audio CD with win2k
greets
I've got Yamaha CRW2100E (16X10X40X) and it works fine except burning an audio CD's.
I've try everything with <a href="http://www.nero.com" target="_blank">nero</a> to get any audio CD but i was unable to burn it...
I have:
CPU:350 mhrz
RAM: 92 MB
Windows: 2000
I have latest firmware (1.0n)
any suggestions,comments,quations are welcome
-
March 2nd, 2002, 01:11 PM
#2
[quote]Originally posted by C0NF0RTY:
<strong>greets
I've got Yamaha CRW2100E (16X10X40X) and it works fine except burning an audio CD's.
I've try everything with <a href="http://www.nero.com" target="_blank">nero</a> to get any audio CD but i was unable to burn it...
I have:
CPU:350 mhrz
RAM: 92 MB
Windows: 2000
any suggestions,comments,quations are welcome</strong><hr></blockquote>
explane more? , if u have a cd-writer go to nero go into wizard , select sorse press next and go!
if u do that it should work ,,,if not WHAT is your problem ?
more details please ?
-
March 2nd, 2002, 02:31 PM
#3
Registered User
i don't use nero's wizard!!!
well the problem is that i can't burn any Audio-cd (for cd players)
i can burn data-CD with no problems even under X16 but i can't an audio-cd
i've try track-at-once and disk-at-once but none of them worked...
error message is always different if it is important i'll post it here
P.S. is there any program that burns under DOS?
-
March 2nd, 2002, 03:03 PM
#4
[quote]Originally posted by C0NF0RTY:
<strong>i don't use nero's wizard!!!
well the problem is that i can't burn any Audio-cd (for cd players)
i can burn data-CD with no problems even under X16 but i can't an audio-cd
i've try track-at-once and disk-at-once but none of them worked...
error message is always different if it is important i'll post it here
P.S. is there any program that burns under DOS?</strong><hr></blockquote>
why not use the wizard?
also try turning the burn speed down to 4 or 8 , as audio extraction is different than data.
also I note your question states "CD-rw " ,,,,RWs do NOT work on the "average home/car cd player
try d/loading a copy of clone-cd , (evaluation copy) from <a href="http://www.elby.org" target="_blank">www.elby.org</a> , and try that.
yes the error messages are inportant , they may actually tell you what the fault is.
And the answer to your last question RE: dos writing ,yes there is (are) , but as they tend to be a complicated string of dos (to type) you would (for the time being) be better sticking to windows.
-
March 2nd, 2002, 03:56 PM
#5
Registered User
[quote]Originally posted by freddy:
[QB]
also try turning the burn speed down to 4 or 8 , as audio extraction is different than data.
<hr></blockquote>
Yeah... i've try even under X2... and than i was unlucky
[quote]try d/loading a copy of clone-cd , (evaluation copy) from <a href="http://www.elby.org" target="_blank">www.elby.org</a> , and try that.<hr></blockquote>
That's the problem!!! i don't have 2 CD-rom's.I've convert from *.cda to *.wav
any way i'll ask from my neighbour an CD-rom, i'll give it a shoot
[quote]RE: dos writing ,yes there is (are) , but as they tend to be a complicated string of dos (to type) you would (for the time being) be better sticking to windows<hr></blockquote>
That sound interesting!
P.S.The error msg "write error, could not perform end of disk at once"
-
March 2nd, 2002, 04:02 PM
#6
so why do you need 2x CDs
copy from (sorce) D: copy to d: , put music cd in writer copy from d: to d: ,,clone cd reads cd , spits it out and asks for blank disk.
NO converting to do ,,,,click, click done.
same with nero using wizard.
are you trying to copy cda files onto your h/d and then burn?
-
March 2nd, 2002, 05:59 PM
#7
Registered User
i didn't know i can copy CD from 1 CD-rom!!!
I've try as u told me but it didn't work.
I've save log file here is part
[quote] 01:35:26 #40 Text 0 File Mmc.cpp, Line 11108
StartDAO : CD-Text - On
01:43:17 #41 SCSI -1119 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0413E920
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0x23 0xD3 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0xAE 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x00
01:43:17 #42 mmc -1119 File Writer.cpp, Line 321
Track following error
01:43:17 #43 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
01:43:17 #44 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
01:43:20 #45 Phase 34 File dlgbrnst.cpp, Line 1438
Simulation failed at 8x (1,200 KB/s)
01:43:20 #46 Text 0 File Scsicmd.cpp, Line 368
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 02/03/2001 20:55:54
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 02/03/2001 20:55:54 <hr></blockquote>
interesting thing i have SCSI error,but my burner is none SCSI it is atapi?
-
March 2nd, 2002, 07:20 PM
#8
[quote]Originally posted by C0NF0RTY:
<strong>i didn't know i can copy CD from 1 CD-rom!!!
I've try as u told me but it didn't work.
I've save log file here is part
interesting thing i have SCSI error,but my burner is none SCSI it is atapi?</strong><hr></blockquote>
yes dont worry about the scsi thing.
how is this burner set up? , ie u said u only had 1 machine.
with clone u copy an image to h/d and then write it (swop disk) ,why not try to just copy an image ie read to image file , then from image to disk, is it jibbing on the read or write ,,,slow bown the read speed, I think the demo version only writes at 2 speed,
alternately try another brand of cd,s if u email me i will send u links or zips of good "rippers" to rip the audio onto drive then write with nero etc.
freddy
-
March 3rd, 2002, 12:21 PM
#9
Registered User
-
March 3rd, 2002, 12:56 PM
#10
-
March 3rd, 2002, 01:07 PM
#11
you have got the latest firmware check ( <a href="http://www.yamaha.com/yec/multimedia/customer/help_win/2100EZ_Whelp.html" target="_blank">http://www.yamaha.com/yec/multimedia/customer/help_win/2100EZ_Whelp.html</a> ) please check model No coz i cant see 2100E model ,
is it possible the drive is goosed ? , did it work before 2k?
freddy
-
March 3rd, 2002, 02:28 PM
#12
Registered User
-
March 4th, 2002, 05:31 AM
#13
Registered User
i didn't mention that without your tenacity i wouldn't do it
thank you again
-
March 4th, 2002, 02:18 PM
#14
cheers bud , dont forget offer RE: ,progs ,,ripping/writing ,,,give us a email/PM if stuck
alan
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks