[RESOLVED] mke w95 file
Results 1 to 6 of 6

Thread: [RESOLVED] mke w95 file

  1. #1
    wyrmrider
    Guest

    Resolved [RESOLVED] mke w95 file

    when installing new hardware under w95a I am reqyested to insert disk 5 for file
    MKECR5xx.mpd.win95_05.cab

    I now have W95 OCR b on cdr
    anyone have this driver?

    setup is creative 2speed cdr 563 B with CT1810 interface board (MKE -panasonic interface on 386-40

  2. #2
    Banned
    Join Date
    May 2001
    Location
    North West England.
    Posts
    3,200
    google is working well tonight

  3. #3
    Intel Mod Platypus's Avatar
    Join Date
    Jan 2001
    Location
    Australia
    Posts
    5,783
    This is a standard driver built into Windows for the Panasonic CR56x CD-ROMs.

    There are several ways to sort out the chicken-or-egg situation of needing a CD-ROM to get the CD-ROM driver.

    First I'd suggest pointing the installer dialog at C:\windows\system\iosubsys\ , as this is where the driver should be if it has already been copied onto the hard drive and Windows isn't smart enough to find it (it happens) ...

    Also the driver would be downloadable from sources such as driverguide or Panasonic (Matsus h i ta) support site.

    The commonest way to get it from the CD is to temporarily connect a standard ATAPI (IDE Interface) CD-ROM to get CD access.

    Another way is to use EXTRACT on another system to get the file from the CD, instructions here:

    http://support.microsoft.com/default...b;EN-US;129605

  4. #4
    Banned
    Join Date
    May 2001
    Location
    North West England.
    Posts
    3,200
    Quote Originally Posted by Platypus
    This is a standard driver built into Windows for the Panasonic CR56x CD-ROMs.

    There are several ways to sort out the chicken-or-egg situation of needing a CD-ROM to get the CD-ROM driver.

    First I'd suggest pointing the installer dialog at C:\windows\system\iosubsys\ , as this is where the driver should be if it has already been copied onto the hard drive and Windows isn't smart enough to find it (it happens) ...

    Also the driver would be downloadable from sources such as driverguide or Panasonic (Matsus h i ta) support site.

    The commonest way to get it from the CD is to temporarily connect a standard ATAPI (IDE Interface) CD-ROM to get CD access.

    Another way is to use EXTRACT on another system to get the file from the CD, instructions here:

    http://support.microsoft.com/default...b;EN-US;129605

    check the date,

  5. #5
    Intel Mod Platypus's Avatar
    Join Date
    Jan 2001
    Location
    Australia
    Posts
    5,783

  6. #6
    Banned
    Join Date
    May 2001
    Location
    North West England.
    Posts
    3,200
    Quote Originally Posted by Platypus
    i was doing a google for something ,,,and was directed to this thread ,from google

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •