Linksys EFAH24

[Pyroate]

Does anyone know the default IP adress for this hub? Have contacted linksys twice both tech's told me that they couldn't give me that info. <IMG SRC="smilies/mad.gif" border="0">

[Higg]

If you own that HUB I'd probably chase them (if I were you)...

If you have a spare time, just take a networkscanner like http://www.networkview.com/ (I have a demo one from them - don't know if that still exists) and brute-force-ping till the device answers... mainly most devices have 192.168.0.1/24 (/24=netmask 255.255.255.0) or 10.0.0.1/24 or are just listening to DHCP

I'd try the ones above before scanning...

[Higg]

Ok... searched and downloaded it: ftp.linksys.com/pdf/efahubs.pdf - the manual for you!

Well it says nothing about managing - so it isn't accessible... it seems that the linksys-guys haven't done their job right.
So I wouldn't expect too much from it - it's just an autosensing 10/100 HUB - not more, not less...

[Pyroate]

Thanx our head network admin wants the ip though so i guess it's brute force.

[Captain_Kirk]

If there is a serial port, connect using telnet to it and look at the config. Should be in there somewhere. Best of luck with that one... Failing that pester Linksys...

[Higg]

Originally posted by Captain Kirk:
<STRONG>If there is a serial port, connect using telnet to it and look at the config. Should be in there somewhere. Best of luck with that one... Failing that pester Linksys...</STRONG>

... sorry, but you don't use telnet through a serial port - what you mean is a terminal prog ...