Supermicro P6sbu atx strange boot
Results 1 to 3 of 3

Thread: Supermicro P6sbu atx strange boot

  1. September 28th, 1999, 12:38 PM #1
    sradicator
    sradicator is offline
    Registered User sradicator's Avatar
    Join Date
    Jun 1999
    Location
    Milan,Italy
    Posts
    118

    Red face Supermicro P6sbu atx strange boot

    I have mounted in a pc a P6SBU with only SCSI peripherals (Cd, Jaz & Hd). No Ide.
    On boot the message is: pri master drive atapi incompatible.
    Boot sequence in bios is floppy,scsi,disabled.
    I tried to disable on board ide, but the result was that the mobo stops on the "wait..."
    I have missed some settings? Pri ide is set on "auto".
    Reply With Quote Reply With Quote
  2. September 28th, 1999, 02:29 PM #2
    schultzz
    schultzz is offline
    Registered User
    Join Date
    Apr 1999
    Posts
    191

    Post

    You have no IDE devices? Then it appears your BIOS is looking for one but can't find it, poor thing - thus the WAIT... message. See if there is a way to disable the primary IDE setting in the BIOS...it appears AUTO is not going to do it. I suppose there could also be a jumper setting for this?
    Reply With Quote Reply With Quote
  3. September 29th, 1999, 12:47 PM #3
    sradicator
    sradicator is offline
    Registered User sradicator's Avatar
    Join Date
    Jun 1999
    Location
    Milan,Italy
    Posts
    118

    Smile

    Thanks master, all resolved
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules