1394 networking?
Results 1 to 2 of 2

Thread: 1394 networking?

  1. #1
    Adm¡nistrator JungleMan1's Avatar
    Join Date
    Jan 2001
    Posts
    2,463

    Post 1394 networking?

    I see this item in my Network Connections screen. I only have one computer in my house that has Firewire (1394) but I'll be getting back my laptop soon and that has 1394. could someone fill me in on how hard it is to set up this "1394" network? or is it just plugging in 2 computers?

  2. #2
    Banned Toppro's Avatar
    Join Date
    Jan 2001
    Location
    Vancouver
    Posts
    199

    Smile

    Using IEEE 1394 (FireWire) Devices with Windows XP

    --------------------------------------------------------------------------------
    The information in this article applies to:

    Microsoft Windows XP 64-Bit Edition
    Microsoft Windows XP Professional
    Microsoft Windows XP Home Edition

    --------------------------------------------------------------------------------
    If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware:
    <a href="http://support.microsoft.com/support/windows/topics/hardware/hwddresctr.asp" target="_blank">http://support.microsoft.com/support/windows/topics/hardware/hwddresctr.asp</a>


    SUMMARY
    This article describes the Institute of Electrical and Electronic Engineers (IEEE) 1394 standard and how to use IEEE 1394 with Microsoft Windows XP.

    NOTE: Apple Computer FireWire is a common implementation of the IEEE 1394 standard.

    MORE INFORMATION

    IEEE 1394 Capabilities
    The IEEE 1394 standard defines a high speed serial interface that can be used to connect peripheral devices, for example, printers, scanners, and cameras, to your computer. Some common features of the IEEE 1394 standard are:
    A simple plug and socket connection. This connection is visually similar to universal serial bus (USB) connections, although USB and IEEE 1394 are not compatible.


    The capacity to have up to 63 devices connected serially (in series) to a single port.


    Data transfer speeds of up to the rate of 400 megabytes (MB) per second. (The maximum speed is presently 200 MB per second.)


    Thin wire cable.


    Hot plug and play capability. (You do not need to turn off a computer to connect and use a peripheral device.)


    The ability to chain devices together in a number of different ways without terminators or complicated setup requirements.


    The ability for IEEE 1394-compliant devices to connect together without the use of a computer (for example, when you are dubbing video tapes).


    Asynchronous communication for batch or packet data transfer and storage.


    Isochronous communication for real-time voice and video transmission, and any other program that is better-suited for streaming data transfer.


    Devices as far apart as 4.5 meters (nearly 15 feet) can be connected.


    IEEE 1394 on Windows XP
    Windows XP has built-in IEEE 1394 support. To use all the capabilities of the IEEE 1394 standard, your computer must have an IEEE 1394 adapter installed. If your computer has a FireWire adapter, the adaptor is IEEE 1394 compatible. Some of the capabilities of a Windows XP-based computer with the IEEE 1394 standard are:
    Instant network connectivity by plugging two or more computers together (no additional hardware or software required).


    End-to-end throughput of over 50 Mbps with plenty of digital bandwidth remaining for demanding audio-visual programs.


    Transmission Control Protocol/Internet Protocol (TCP/IP) over IEEE 1394. This feature makes it very easy to share a single Internet connection when you connect one computer to the Internet and then connect more computers to the first computer. The Windows XP built-in Internet Connection Sharing feature provides the necessary software support.

    NOTE: Internetwork Packet Exchange (IPX) and other networking protocols are not supported.


    The ability to use IEEE 1394 drivers for peripheral devices. These drivers are provided by the manufacturers of the devices.


    Notes
    Windows XP comes with full support with IEEE 1394; you are not required to install any software. If you need to install an adapter, simply plug it in to an available adapter slot, and Windows XP completes the installation.


    To install an IEEE 1394 device, your computer must have an IEEE 1394 adapter. If it does, then you are only required to plug in the device.


    The IEEE 1394 drivers that you may need are provided by the manufacturer. Most IEEE 1394 devices do not need special drivers.

    Additional query words: HWIEEE

    Keywords : kbhw kbHardware
    [code] </pre><hr></blockquote>

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •