Crash during CD burning

[format c:]

OK before I go here is my system specs
Celeron 733 mhz
Asus tusl2-c
512 megs of ram ( Micron pc 133 )
32 meg Asus v7100 agp video card
SB live x gamer
Realtech 10/100 nic
enermax psu
30 gig Quantum HD
LG 52 x cd rom drive
LG 8x4x32 cdrw drive slaved to cdrom drive
floppy drive
Windows XP home edition
Well I am getting ready to burn a cd using the included cd burning software
I instruct the software to make the image on the hard drive and allow it to do it's thing
After abot 2 minutes my screem goes black and I am getting a siron like sound coming from my PC's speaker
I hit reset and I get the siron sound again, the only way out of this is to power the system down and cold boot it
Everything is fine after the scan disk but I an wondering if I uncovered a major bug
I downloaded and installed Roxieo Cd creator 5 ( I guess they are developing the cd burning software for XP )
Anyone got any ideas as to what happened , I thought I toasted my mother board

[Sowulo]

Sounds like the extra load on the CPU caused an Overheat condition....You're not overclocked are you?

[Ron Prestenback]

I think your OS finally found out about your nick on this board, and is paying you back!

[fmmagyar]

For what it's worth, I tried to install Easy CD Plat 5 also on my system (XP) and it didn't work. I believed it caused a shutdown problem but my HP Tech assured me that it didn't. I just read from a Woody column that CD PLat 5 is not XP compatible, can not be installed and that Roxio is developing either a patch or updating for XP compatibility.

[format c:]

Nope I am not overclocked at all and I was using the CD burning software that came with XP , It was after the crash that I downloaded and installed Cd creator 5.0 standard for xp ,I am using a gold orb HSF with the CPU paste

[WebHead]

Use Nero 5.5 and all your problems will magically go away.

[Quiet Thunder]

[quote]Originally posted by fmmagyar:
<strong>For what it's worth, I tried to install Easy CD Plat 5 also on my system (XP) and it didn't work. I believed it caused a shutdown problem but my HP Tech assured me that it didn't. I just read from a Woody column that CD PLat 5 is not XP compatible, can not be installed and that Roxio is developing either a patch or updating for XP compatibility.</strong><hr></blockquote>

I'm using both Nero 5.5 and Easy CD Creator 5 platinum, and havn't had any problems. Try uninstalling, and reinstalling, and apply the patch off Roxio's website BEFORE you reboot. Roxio works just fine on XP, but there was an issue with 2k and the Take Two software.

[DiR[ëctory]]

[quote]Originally posted by fmmagyar:
<strong>For what it's worth, I tried to install Easy CD Plat 5 also on my system (XP) and it didn't work. I believed it caused a shutdown problem but my HP Tech assured me that it didn't. I just read from a Woody column that CD PLat 5 is not XP compatible, can not be installed and that Roxio is developing either a patch or updating for XP compatibility.</strong><hr></blockquote>


I downloaded and installed Roxio's CD Platinum 5. It worked fine and is still working fine. What type of CDRW drives are you using? Did the software not work or is it the cd burner that is not working?

Josh

[CoreLogiK]

ECD Creator is NOT caompatible with XP,. however if you install it (NOT Direct CD) and then apply the 5.02b update BEFORE rebooting,... ECD Creator will run,..... just has issues sometimes.

Roxio is working on the UpDate for XP,... in fact its up on their site but the server is getting slammed at the moment,.. and the link wont connect.

When you are able to get the XP UpDate, ECD Creator/Direct CD 5.0 Platinum will run on XP without issues.

[format c:]

Both my reader and cdrw are made by LG , I was using the reader to make an image of the cd on the hard drive. I was going to burn from that image , I was using the burning software that came with XP home edition
Both drives have worked flawlessly under Win 9x and Norton ghost
I checked the Windows cd burning software and it said that it was under devlopment by Roxio and there was a link that took me to Roxio's web site where I could download Roxio 5 stnadard edition for Windows XP