-
July 4th, 2001, 08:06 AM
#1
Can't initialize Creative Webcam +
I am unblae to initialize a webcam plus. I am running a P3-866 on an Abit SE6 board with i815E chipset. When I try to invoke the webcam control program I get a dialog box asking to "select viseo source". There is only one item in the source list, the webcam. When I select it, the same dialog box reappears. Eventually, i get a error message indicating that the camera couldn"t be initialized. I have tried to uninstall and reinstall latest drivers, used known working USB ports, and tried a self powered USB hub port. All have not worked. Please advise. <IMG SRC="smilies/frown.gif" border="0">
-
July 4th, 2001, 10:21 AM
#2
maybe a bad camera.
Does it work on other pc's?
Have you got the latest version of drivers?
<IMG SRC="smilies/smile.gif" border="0">
Would you like fries with that?
-
July 4th, 2001, 11:40 AM
#3
I neglected to mention that I previously used a Philips USB camera that worked fine. At this point in time it also is unable to work. The point at which the Philips camera failed to work was when I upgraded my motherboard to its current configuration.
-
July 4th, 2001, 01:49 PM
#4
Registered User
- Try
- uninstalling the drivers in safe mode
- make sure to remove all References to both cams in control panel in safe mode..
You can find more info
Here
"More Than Merely Names"
"NEVER FORGOTTEN"
-
July 5th, 2001, 09:15 AM
#5
In removing any reference(s) to the devices in control panel, do you mean merely "device manager"? Might there be references to the devices elsewhere in Control Panel? If so, where? Thanks for the help?
-
July 8th, 2001, 05:46 PM
#6
Registered User
Originally posted by adhahn:
<STRONG>In removing any reference(s) to the devices in control panel, do you mean merely "device manager"? Might there be references to the devices elsewhere in Control Panel? If so, where? Thanks for the help?</STRONG>
I'm sory I meant device manager in safe mode
<IMG SRC="smilies/eek.gif" border="0">
"More Than Merely Names"
"NEVER FORGOTTEN"
-
July 15th, 2001, 08:10 AM
#7
I removed all the drivers of the webcam+ and the Philips cameras in safe mode. Also removed the USB ports and controllers in safe mode allowing Windows to reinstall them. I reinstalled the drivers for the webcam+. At this point, it is still repeating the same problems. <IMG SRC="smilies/frown.gif" border="0">
-
July 29th, 2001, 10:29 AM
#8
I have substituted a add-on USB PCI card to solve another problem I had with USB ports. I tried the camera again connected to the add-on USB port. Still could not initialize the camera. <IMG SRC="smilies/frown.gif" border="0">
-
July 30th, 2001, 09:17 AM
#9
my experiance is to take the camera and either
1) throw it out the window
2) use a hammer to smash it
3) return it and get your money back
I have had way tomany problems with these cameras. And there tech support stinks they dont know how to fix the problem so why try and miss with it if its not fixable?
I would go with a intel or sothing of the sort. $100+
http://www.amd.com/us-en/assets/cont...uts/athlon.gif
Do you leak any fluids, do you have any bumps on your rear, do you have any unpleasant odors?
If you answered yes to any of these then you are not qualified to own a new AMD ATHLON XP.
If someone ask you if you are running the all-new fastest AMD ATHLON XP, just turn around and reply "WHY YES, AND ITS CERTIFIED"
http://www.daemonprojects.com/
-
August 2nd, 2001, 05:21 PM
#10
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks