Cold Cathode mod problem

[MD_Geist]

well the PS could be the problem.

you are running quite a bit for just a 350 PS, i would almost suggest if you cang et your hands on a spare 450 or so to test it out and see if things are the same or not.

You can also grab a multimeter and see how much power is being pulled and look for drops in power when things are turned on

or as a interesting mod, if your case is big enough, buy a cheap 250 PS and put it in there as well, run the lights and smaller less power consuming items on the 250, i have seen it done before, just can't recall where i saw the guide on what pins to place where to get the PS to wakeup along with the main one.

MD