Techies CD + bag
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 19

Thread: Techies CD + bag

  1. #1
    Senior Member Garak's Avatar
    Join Date
    Jun 2001
    Location
    Hebburn, Tyne & Wear, North East England
    Posts
    2,448

    Techies CD + bag

    Hey all

    Ok, I'm looking for applications / floppy disc images to put on a "diagnostic" CD and what are the main tools I should need (screwdrivers are obvious, but any reccomended brands?)

    Thanks

  2. #2
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    start with winrar/winzip, a dos virus checker... an autoexec.bat/config.sy with a generic cdrom driver, an ins file for bt pay as you go, via 4 in 1's, adaware, spybot, diskdata, ie6sp1, netscape, opera, msjava, sunjava, directX 8.1 and 9, wmp7, winamp, pcinspector, ftp client, quicktime, realplayer, various im install exes, hwinfo, sisoftsandra etc etc.

    All the BIG downloads from M$ and other places.

  3. #3
    Senior Member - 1000+ Club Outcoded's Avatar
    Join Date
    Apr 2001
    Location
    Somewhere in the UK, never quite sure where
    Posts
    1,689
    Tools? Leatherman, toll adapter, Cat 5 crimps and a hammer works for me.

  4. #4
    Registered User SpongeBob's Avatar
    Join Date
    Oct 2002
    Location
    Florida
    Posts
    132
    Rather than Winzip/winrar get PKunzip for DOS (no install needed to use) and WinACE for windows... WinAce works for ALL .zip .rar and .ace files!!

    The latest SP for all M$ OS'es, Netscape, IE6 (newest one)

    Few common drivers.. Unversial 3com modem drivers, Nvidia Driver, ATI drivers.

    Bootable CD with few different boot images, DOS 6.22 +mem managers+Ramdrive and network support, Dos 6.22 Pure (for Bios updates), Win98 "dos" boot for Fat 32 partitions and NTFS removal, win2k boot images with a very well writen boot.ini and a 120sec choose time. (solves the bootloader issue or other croupt files on NT/ 2k bootup)

    Network scanner/manager, like LanGaurd and Ideal Administration. (lets you manager user accounts and security policies, exchange mailboxes and even remotly push VNC to clients/servers for remote control)

    IIS security checker, Active Directory toolbox, Windows Resource kits, latest updated bootable virus scanner on CD.


    All in all you should have 3-5 CD's and a floppy or 2. Plus i bought a cheap tool kit and a 39 cent tool magnitiser. The kit was $15 had 2 sizes for phlips and flat head screw drivers.(real ones.. not the crappy ones where you change out the tips) A screw grabber, twesers, and i removed the IC chip puller and replaced it with a pair of long needle nose plyers. (from the fishing department, so they are not the really really skinny ones.) Good for bending light metals and getting into med. sized places. (small places call for the screw grabber thingy)



    Oh and a leatherman on my belt.
    You know you want a crabby patty!!

  5. #5
    Registered User Wayward Clam's Avatar
    Join Date
    Dec 2000
    Location
    the depths of Lake Superior
    Posts
    3,778
    One thing I've found helpful on CDs is I have stored ALL of the drivers I have EVER needed onto a separate drive, sorted by device, company, model, and OS (in that order). Then I have backed up these drivers onto three CDs (video & related, sound & related, and NIC/modems and related; each CD has some spare space for things that don't fit the categories). These CDs come with me to EVERY service call I make. Beats the HELL out of trying to download the latest Detonators or whatever over a 56K connection.

    Another good one: Maximum PC used to (dunno if they still do) publish an annual Maximum CD that was nothing but the best utilities (no games, etc.). I haven't been able to get one in the last two years but the copy I have of the older one STILL comes in handy even though it is out of date now.

    I also have a small container of spare screws, standoffs, bits, pieces, doodads, and wahoos, because you always end up helping some yahoo who has three hard drives hanging loose inside his case because he doesn't have the screws to install them properly...
    Flash! Don't heckle the supervillain!

  6. #6
    Registered User meatwad's Avatar
    Join Date
    Oct 2002
    Location
    Numba 1 in tha hood G
    Posts
    3,835
    Here's what I have.

    Craftsman screw/nut drivers. In the U.S. at least, they have a life time warranty which comes in handy with the tiny ones. I've worn out a couple.

    MiniMaglite works great for me. Needle nose pliers, wire strippers, diagonal cutters, pocket knife, small tape measure, Sharpee Markers, Small tins of various screws like case, fine threaded drive screws, coarse drive screws, power supply screws, notebook screws etc.

    CD's with various O/Ses, all the AOL's from version 4 on a handy little disk, Techie disk with Snadboy's Revelation, Adaware, Spybot, latest IE, Latest DirectX, couple of virus scanners I like to use, VIA 4 in 1s, latest Nvidia drivers. Stuff like that.

  7. #7
    Senior Member Garak's Avatar
    Join Date
    Jun 2001
    Location
    Hebburn, Tyne & Wear, North East England
    Posts
    2,448
    thanks all, will search for these utils later, but if anyone feels like posting links, please do so

  8. #8
    Registered User Darkstar's Avatar
    Join Date
    Oct 2001
    Location
    St. Louis, MO USA
    Posts
    665
    I recommend keeping a flask of Jim Beam in your tech bag too.

  9. #9
    Senior Member Garak's Avatar
    Join Date
    Jun 2001
    Location
    Hebburn, Tyne & Wear, North East England
    Posts
    2,448
    whats jim beam?

  10. #10
    Registered User Darkstar's Avatar
    Join Date
    Oct 2001
    Location
    St. Louis, MO USA
    Posts
    665
    It's an unofficial tool to help you deal with pinheads and morons you encoutner on the job. His cousins are Jack and Johnny.

    http://www.jimbeam.com

  11. #11
    Registered User SpongeBob's Avatar
    Join Date
    Oct 2002
    Location
    Florida
    Posts
    132
    Originally posted by Darkstar
    It's an unofficial tool to help you deal with pinheads and morons you encoutner on the job. His cousins are Jack and Johnny.

    http://www.jimbeam.com
    ROFL!!!!!!



  12. #12
    Senior Member Garak's Avatar
    Join Date
    Jun 2001
    Location
    Hebburn, Tyne & Wear, North East England
    Posts
    2,448
    oh, I see

  13. #13
    Senior Member Garak's Avatar
    Join Date
    Jun 2001
    Location
    Hebburn, Tyne & Wear, North East England
    Posts
    2,448
    Hi all...

    Does anyone know of a commercially free to use FTP client?

  14. #14
    Registered User Guts3d's Avatar
    Join Date
    Jan 2003
    Location
    Pittsburgh U.S.A.
    Posts
    2,328
    The only things I can add would be a can or three of compressed air, case fans, ( they are always going bad ), a spare hard drive to back up data, and a copy of Ghost on floppy...

  15. #15
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    Originally posted by Garak
    Hi all...

    Does anyone know of a commercially free to use FTP client?
    this thread has a few

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •