[RESOLVED] Media Magic

[fndink]

Does anyone know how to get the Media Magic ISP16 to work in Windows95

[Harry_W]

You have to manually enter the system.ini
and win.ini

I have used the media magic disks for win31 sucessfully though

Do you have the disk(s)

Also they are SB compatible you can try a fake



------------------

[Harry_W]

I don't have it installed curretnly but may have an "ini" backup I can get to you

[Harry_W]

SYTEM.INI

[boot]
system.drv=system.drv
drivers=mmsystem.dll power.drv msmixmgr.dll

[386Enh]
device=visp-16.386

device=*enable
DMABufferSize=4
MaxDMAPGAddress=1000

[drivers]
wavemapper=*.drv

[drivers]
wavemapper=*.drv
MSACM.imaadpcm=*.acm
MSACM.msadpcm=*.acm
Wave=C:\ISP16\ISP-16.drv
Aux=C:\ISP16\ISP-16.drv
MIDI=C:\ISP16\ISP-16.drv
MIXER=C:\ISP16\ISP-16.drv
MIDI1=C:\ISP16\MPU401P.DRV

[iccvid.drv]

[mciseq.drv]
disablewarning=true

[mci]
cdaudio=mcicda.drv
sequencer=mciseq.drv
waveaudio=mciwave.drv
avivideo=mciavi.drv
MPEGVideo=mciqtz.drv
videodisc=mcipionr.drv
vcr=mcivisca.drv

[drivers32]
VIDC.IV41=ir41_32.ax
vidc.CVID=iccvid.dll
VIDC.IV31=ir32_32.dll
VIDC.IV32=ir32_32.dll
vidc.MSVC=msvidc32.dll
VIDC.MRLE=msrle32.dll
msacm.lhacm=lhacm.acm
MSACM.MSNAUDIO=msnaudio.acm
MSACM.imaadpcm=imaadp32.acm
MSACM.msadpcm=msadp32.acm
MSACM.msgsm610=msgsm32.acm
MSACM.msg711=msg711.acm
MSACM.trspch=tssoft32.acm

[snd16.drv]
IOAddress=530
Interrupt=2
DMADAC=1
DMAADC=1
SingleModeDMA=Yes

[m16midi.drv]
Interrupt=5
Installed=1

==============

WAVEMIX.INI

[default]
WaveBlockLen=688
WaveBlocks=5
Remix=1

====


AUTOEXEC.BAT (note the Sound Blaster codes)

@if exist c:\checkmbr.exe c:\checkmbr quiet (Validate MBR, not a TSR)
LH /L:0;1,45456 /S C:\DOS\SMARTDRV.EXE /X
SET BLASTER=A220 I10 D1 T4
set ISP16=C:\ISP16
C:\ISP16\ispinit /b
@ECHO OFF
PROMPT $p$g
C:\DOS\MSCDEX.EXE /S /D:ASPICD0 /M:12 /L
SET PATH=C:\;C:\DOS;C:\Windows\System;C:\xtg;C:\isp16; c:\xy;
SET TEMP=C:\TEMP


=====
CONFIG.SYS (for CD off card only)

deviceHigh=C:\SCSI\ASPI8DOS.SYS /D
deviceHigh=C:\SCSI\ASPIDISK.SYS /D
deviceHigh=C:\SCSI\ASPICD.SYS /D:ASPICD0
DEVICEHIGH /L:1,12048 =C:\WINDOWS\SETVER.EXE
rem DEVICEHIGH=C:\DOS\SETVER.exe
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE RAM
DOS=UMB
DOS=HIGH
Device=C:\ISP16\CDSETUP.SYS /T:X