|
-
September 16th, 2003, 11:31 PM
#1
Registered User
ICS and VNC
Is there a way to VNC into a machine that is behind a win 2k pro Internet connection-sharing box? The WAN is a static ip, and the LAN is set to DHCP. Granted, the LAN side could be set up for static so the ip of a machine is not a guess after the lease expirers. Using Tight VNC for this project.
-
October 6th, 2003, 11:07 AM
#2
This is what I do for pcanywhere and my linksys router.
I configure my router with DMZ to forward the ports from
it to my workstation.
I would figure it would be the same for your situtation with difference
in hardware/software.
Thanks,
Roland
 Originally Posted by Cyphrr
Is there a way to VNC into a machine that is behind a win 2k pro Internet connection-sharing box? The WAN is a static ip, and the LAN is set to DHCP. Granted, the LAN side could be set up for static so the ip of a machine is not a guess after the lease expirers. Using Tight VNC for this project.
-
October 6th, 2003, 11:17 AM
#3
Registered User
 Originally Posted by rolandtignor
This is what I do for pcanywhere and my linksys router.
I configure my router with DMZ to forward the ports from
it to my workstation.
I would figure it would be the same for your situtation with difference
in hardware/software.
Thanks,
Roland
There is a big difference in that he is using ICS and not a hardware based router.
this should do the trick
Also for kool advanced features of ICS check out this page
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks