|
-
November 19th, 2003, 11:35 AM
#1
recreate $ shares at reboot
My PDC (NT4 server SP6a) won't recreate $ shares to drives at re-boot (c$, d$, e$), and I'm hoping someone might have some pointers
Net share recreates them, so does sharing at the machine, but re-boot loses them!
Thanks
-
November 19th, 2003, 12:02 PM
#2
Banned
This doesn't sound too promising. It is rare to find an article with a statement like:
CAUSE
The cause is unknown.
But there is a workaround...
Admin$ and IPC$ Shares Missing at Domain Controller Startup
-
November 19th, 2003, 12:10 PM
#3
[QUOTE=Ya_know]This doesn't sound too promising. It is rare to find an article with a statement like:
Thanks Ya_Know. The admin$, print$, IPC$, netlogon$ and all the others recreate, but not the drives!!!
NooNoo has given me a steer with net use \\comutername\sharename/persistent:yes
but I get system errors, so I'm wondering if this is physical problem, not software.
Thanks for your help though - Take Care
-
November 20th, 2003, 06:47 AM
#4
Registered User
Here's how to resolve that
Easy fix!
Open up regedit, and navigate to the following two keys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\lanmanserver\parameters
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\lanmanworkstation\parameters
under the 'Parameters' key, look for two DWORD values named 'AutoShareServer' and 'AutoShareWks'. Set the value data for these two DWORD entries from '0' to '1', then exit the Registry Editor & bounce the server. After a reboot, you should note that your $ shares on all drives are now restored

-mike
Oops! Almost forgot to give credit where it is due . . .
SOURCE: http://www.is-it-true.org/nt/registry/rtips2.shtml
Last edited by NEPATEC; November 20th, 2003 at 06:52 AM.
-
November 20th, 2003, 07:46 AM
#5
Thanks Mike [Nepatec], that was right on the money
The wrkstation keys were set at 1, the server keys weren't
Now all I have to do is figure what caused [what I assume must be] the default settings to change.
Anyway, thanks again, I appreciate the help
Take care
-
November 20th, 2003, 09:39 AM
#6
Banned
 Originally Posted by Lowland
Thanks Mike [Nepatec], that was right on the money
The wrkstation keys were set at 1, the server keys weren't
Now all I have to do is figure what caused [what I assume must be] the default settings to change.
Anyway, thanks again, I appreciate the help
Take care
Running System policy is what creates that string...Right?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks