|
-
October 28th, 2001, 06:24 AM
#1
Geforce 2 mx conflict
I have a problem with my geforce 2 mx (PCI)
It doesn't work, and the device manager tells me it has a conflict with "System board extension for Acpi bios", and the onboard Intel 810e graphics.
Those two are using the "memory areas", or whatever theyre called in english.
Anyway, I can remove the onboard graphics, but that isn't enough.
Removing Acpi Bios did not help, and the only other thing using this memory thing is the Intel Pci bridge, and without it I cant use Pci.
My comp is a Compaq Presario 7588, with win 98SE.
550mhz, 320mb ram,
-
November 1st, 2001, 05:17 AM
#2
Geezer
Tried all the chipset patches?(for your mb)
-
November 1st, 2001, 06:02 AM
#3
Senior Member
Have you disabled the on board video, it sounds like it hasnt been disabled. that definatly sounds like the problem.
<a href="http://web14.compaq.com/falco/sp_list.asp#manuals" target="_blank">Compaq stuff</a> try this link, hopefully this will tell you something.
-
November 1st, 2001, 09:27 AM
#4
I installed the chipset patches, but that didn't help.
Disabling the onboard graphics didn't help either, there is still a conflict with acpi.
-
November 4th, 2001, 09:31 PM
#5
Would you concider swapping your GeForce2 PCI form my GeForce2 AGP? My Mobo dont like AGP.
It does have 6 PCI slots though. Woo Hoo
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks