Quote Originally Posted by Gollo
I don't think you can. Update the 614's firmware to the latest and check for an option to act as a repeater (or something along these lines). You might check the 624 for the feature as you might have to do it the other way around. But if memory serves me the dlinks didn't offer the repeat feature (at least the 614 that I owned for all of 15 minutes). If you were to purchase one of the dlink ap only (with out the routing functions) MAYBE they have this feature to act as a repeater. Linksys I know offers this feature but you can't mix brands while in repeater mode. Cheers.
So are you my understudy !?! methinks that's very confus-ing, but of course I would

Its a bit like the difference between a hub & a switch, a wifi-ap might be considered a hub (not withstanding the fact that they are mostly routers but that's routing outside your network not in it - you can't route a broadcast signal like radio, its broadcast because of the media its transmitted in which is air), add in a repeater & we now have switches instead of hubs as both the AP & repeater are required to make intelligent decisions about where traffic gets routed from & to .. (each ap needs to 'realise' what clients it has hold of 'best' & make sure the 'right' ap is doing the error control & re-transmission of dropped/lost packets - & that's why Gollo says very correctly that the same brand is important, as, as far as I know, the only methods for this are 'proprietry')

So the bit 'anything special' needs the answer 'repeater' capable access points of the same brand (so both or you may cause yourself intereferance problems) ... alternatively go track yourself down a better antanae ! (but I take it 'here' this is what've got 'laid about' & hence how the question is phrased ? ..)