um...yeah...i got a Win98SE install problem.

[WebHead]

If you can boot to a floppy, then do the following...

1) Download this file and unzip all the contents of this file to a floppy disk using winzip.

2) Now you have all the files you need to do this,.. but now you need to be able to boot from that floppy disk. So from a working Win98se PC, open a DOS window and from the C prompt type "C:\sys a:" without quotes. It has to be from a win98se pc or this sys might not work right for what you want to do.

3) Now you're ready to go. Insert the floppy disk and let the computer boot to it.

4) You'll be faced with 3 choices. Just pick choice 2 (it really doesn't matter either way.)

5) Once it finishes doing some stuff, it'll show the A prompt. At that point, type "a:\mitsumi" without quotes and hit enter.

6) Once it's finished, remove the floppy disk and shut off the computer.

7) Unplug the floppy drive and plug in the cd-rom drive

8) Turn the computer back on. Once it gets to the C prompt type "C:\cd d:" without the quotes and hit enter.

9) At the D prompt type "D:\setup", hit enter and you'll be off and running.

This boot disk is awesome btw. The jedi master who instructed me created it. It will load a basic version of DOS, a DOS mouse driver, Toshiba CD drivers, and Mitsumi CD drivers (which are compatible with 99.999% of all CD-rom drives out there).