Continuous Beeping
Results 1 to 5 of 5

Thread: Continuous Beeping

  1. #1
    Registered User
    Join Date
    May 2001
    Location
    50 Miles outside of Pittsburgh
    Posts
    56

    Continuous Beeping

    Hi all...iam working on a hp computer that had ME on it but the customer wanted 98. So i installed 98 and everything was fine for about 3 months. Now when you boot up the machine there is a constant beeping. beep beep beep for about 2 or 3 minutes then the machine goes into safe mode. If you hit Esc when the beeping starts the machine boots up fine like nothing is wrong. I removed all the cards and reseated them and still no good. I swapped out the video card and still no good. I swapped out the ram and that didnt do the trick. Any ideas what to do...iam at a loss

    Thx Born
    If yea turnem upsidedown they all look the same!

  2. #2
    Registered User jitBob's Avatar
    Join Date
    Aug 2001
    Location
    Woodinville, WA
    Posts
    4,244
    Quote Originally Posted by BornOnFire
    Hi all...iam working on a hp computer that had ME on it but the customer wanted 98. So i installed 98 and everything was fine for about 3 months. Now when you boot up the machine there is a constant beeping. beep beep beep for about 2 or 3 minutes then the machine goes into safe mode. If you hit Esc when the beeping starts the machine boots up fine like nothing is wrong. I removed all the cards and reseated them and still no good. I swapped out the video card and still no good. I swapped out the ram and that didnt do the trick. Any ideas what to do...iam at a loss

    Thx Born
    Have you tried the power supply? Does it only do this on battery or when plugged in?
    Last edited by jitBob; April 15th, 2004 at 03:43 PM.

  3. #3
    Registered User
    Join Date
    May 2001
    Location
    50 Miles outside of Pittsburgh
    Posts
    56
    Hi thx for your reply....its not a laptop. And no i havent checked the power supply...i dont think it is power related....or maybe it is???

  4. #4
    Registered User CNS's Avatar
    Join Date
    Dec 2003
    Location
    Qld
    Posts
    41
    HP's usually show a HP splash screen when you boot up rather than the POST screen. If you haven't already, go into the BIOS setup and find the option to show the POST screen on bootup. I can't tell you exactly what it's called but on a HP it might be "Show Diagnostic Startup Screen" or something like that.

    With a bit of luck that might let you see an error message being displayed and give you more idea of what the beeping is all about.


    cheers

  5. #5
    Registered User Orangeman's Avatar
    Join Date
    Aug 2001
    Location
    Sunny Tacoma, WA
    Posts
    3,536
    My bios allows me to turn the beep on or off. I also allows me to choose which kind of incident gets the beep.
    For example, case-open gets a beep, cpu overheat gets a beep. You might want to consult the mobo manual to find out what three deep beeps mean...

Similar Threads

  1. high volume printer with continuous form feed?
    By dirkpitt in forum Digital Imaging
    Replies: 5
    Last Post: April 13th, 2003, 12:40 PM
  2. Beeping Bios!!!!
    By Bluff in forum BIOS/Motherboard Drivers
    Replies: 4
    Last Post: July 28th, 2002, 10:36 AM
  3. rapid beeping noise
    By Virgo77 in forum BIOS/Motherboard Drivers
    Replies: 4
    Last Post: July 3rd, 2001, 07:56 AM
  4. beeping windows???
    By Cable Modem Tech in forum Windows 95/98/98SE/ME
    Replies: 1
    Last Post: May 3rd, 2001, 02:19 PM
  5. [RESOLVED] memory beeping mobo problem
    By creed3ddolp in forum BIOS/Motherboard Drivers
    Replies: 2
    Last Post: December 14th, 2000, 06:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •