CUL2 / Bios v1006

[wbatten]

There has been reports of flash failure using the Windows flash utility. on this version of the Bios! v1006 for the CUSL2 boards.

just copy the COMMAND.COM to a floppy, the aflash utility and the BIN file.
I have taken the [Command.com] from a Windows98 start up disk and used it to Flash under WinMe and Win2K

Reset the BIOS to [Bios defaults] before flashing.

After flashing, restart Computer, but DONT let it go into the OS [Helps to keep the floppy in the drive] this should take you to the A prompt. After the restart, shut down for about 20seconds, start computer and go into BIOS setting and reconfigure.

-wayne



------------------
I use The best program that cures Windows problems, Far more reliable than Norton Utilities, It's called FORMAT C:...® [I hate AT&T@home cable service]

[Sowulo]

A good reminder. Never flash from Windows. I've never had a problem just booting to a command prompt but for safety's sake, boot and flash from a floppy.

------------------
Ya never know, ya know?