Got me stumped.....
Results 1 to 14 of 14

Thread: Got me stumped.....

  1. #1
    Registered User KINGofBLEH's Avatar
    Join Date
    Feb 2001
    Location
    Greensboro, NC USA
    Posts
    1,680

    Unhappy Got me stumped.....

    Got several users at the office who are having the same problem. Once a day at the same time each user loses all network connectivity. The laptops are IBM T23's which are docked while in the office. They are running Win 2k SP4 IE6.0 on a Win 2k domain. IP addresses, WINS and DNS server are assigned dynamically. Other apps include Office 2k, Lotus Sametime, Minitab, Project, Visio, and QWS3270 (3270 emulator). The symptoms are page not found errors in IE, Sametime loses connectivity to server, unable to access mapped drives, etc. Network: Cisco 6500 and 7500 routers with Cisco switches running multiple VLAN's on each switch.

    So far I have tried reinstalling IE6.0 and SP4. I have also run virus scan (SAV 8 corp. ed.), Spybot and Adaware. No viruses and Spybot only revealed the usual Gator, Comet Cursor, etc.

    Any other thoughts/ideas on how I can troubleshoot this problem?

    Thanks in advance.
    Last edited by KINGofBLEH; June 19th, 2004 at 10:39 AM.
    L


    Welcome to four more years of the most dangerous presidency in history.

  2. #2
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    Yes, being laptops the nic will be allowed to power down. Go into device manager and stop 2k powering down the nic when it thinks its idle.

  3. #3
    Registered User Stalemate's Avatar
    Join Date
    May 2001
    Location
    d4-e5
    Posts
    15,120
    They all lose connectivity at the same time?

    I'd look at the network hardware, see what the logs report at that time.

    There may be something interfering with the electrical supply reaching the switches, like an AC unit sparking up at that time.

  4. #4
    Registered User KINGofBLEH's Avatar
    Join Date
    Feb 2001
    Location
    Greensboro, NC USA
    Posts
    1,680
    A little more info....

    I checked the event logs and the only event showing is 5719 "No Windows NT domain controller is available for domain XXXX. The following error occurred: Not enough storage is available to process this command." I checked and disk usage is 3.5GB/40GB.

    (Note: XXXX is our win2k domain, name omitted)

    Also, the three laptops are located in different cities. All are getting clean A/C power and battery health is good.
    Last edited by KINGofBLEH; June 19th, 2004 at 08:59 PM.

  5. #5
    Registered User Snowbound67's Avatar
    Join Date
    May 2001
    Location
    Lost in Space
    Posts
    50
    Hi King,

    Give this a try... It is a list of things that could cause what you describe.

    http://www.eventid.net/display.asp?e...TLOGON&phase=1

    Snow

  6. #6
    Banned TripleRLtd's Avatar
    Join Date
    Aug 2003
    Location
    SW Florida...eye of the storm.
    Posts
    7,251
    Thats a lot to read Snowman, but great link! I'll bet the answer is in there somewhere.
    What is really curious about this one is the way they shut down at the same time. That to me would indicate a problem with the server and not the workstations.
    What do you all think?

  7. #7
    Registered User Gabriel's Avatar
    Join Date
    Aug 2000
    Location
    Tel Aviv Israel
    Posts
    2,161
    May i uggest that this is might be a problem with connectivity device (hub, switch)

  8. #8
    Geezer confus-ed's Avatar
    Join Date
    Jul 1999
    Location
    In front of my PC....
    Posts
    13,087
    Quote Originally Posted by Gabriel
    May i uggest that this is might be a problem with connectivity device (hub, switch)
    I'd agree that's possible especially given KINGofBLEH's last bit of info, but without being privy to the 'wiring' its hard to conclude definately, but very possible methinks ..

    Snowbound67's link seems to cover every possibility ! but they all seem to come down to some timing/'slight' mis-configuration at the 'server' (so still maybe switch or whatever) end, again without knowing 'more' hard to comment ..

  9. #9
    Registered User Damned Angel's Avatar
    Join Date
    Aug 1999
    Location
    Winnipeg, MB
    Posts
    2,583
    What time of the day are they losing connectivity? is it around noon? Reason I ask is we had a customer with a similar issue. It turned out they had their backups setup for 12pm (noon) instead of 12am. As soon as the backup started, all users would get punted until it was finished.

    If its always happening at the same time, check the building for something that happens around the same time. It may not even be part of your network.

  10. #10
    Registered User gazzak's Avatar
    Join Date
    Jun 2002
    Location
    London, England
    Posts
    3,595
    This could be a clue,

    One of our customers in London has 2 offices in 2 buidings that are network connected by 2 dishes pointing at each other, (don't know what sort of link it is, possibly microwave?). Earlier this year they would lose connection every now and again at exactly the same time of day from one office to the main network in the other building. After a LOT of work they discovered it was the sun shining at a certain angle into one of the dishes that was causing the loss of comms. Obviously on a cloudy day it didn't happen, and when it did happen it could last up to 15 minutes or until a cloud passed by! That's all the details I can offer, but they cured it by making a permanent shadow on the one dish!
    There's no panic like the panic you momentarily feel when you've got
    your hand or head stuck in something

  11. #11
    Registered User JeffO93's Avatar
    Join Date
    Sep 2002
    Location
    Denver
    Posts
    134
    That to me would indicate a problem with the server and not the workstations.
    I'm with you, TripleRLtd.

    It has to be something they all have in common. That's a server.

    Could be a dish, but not likely that all three in different cities would be pointed the exact same direction with the same weather and end up all 3 loosing connectivity.

    @Damned Angel
    I'd also wondered the same thing. I've seen settings 12 hours off before.

    I also wonder about other scheduled tasks like anitvirus updates, or maybe some other application activity that could overwhelm a connection device.

  12. #12
    Laptops/Notebooks/PDA Mod 3fingersalute's Avatar
    Join Date
    Jun 2001
    Location
    PA
    Posts
    3,880
    Quote Originally Posted by NooNoo
    Yes, being laptops the nic will be allowed to power down. Go into device manager and stop 2k powering down the nic when it thinks its idle.
    Good suggestion Noo, I do this on all systems, 2K and XP, not just the laptops. I don't like windows deciding it's a good time to just power down crucial parts of my hardware for me!

  13. #13
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    Heh, a local college put a microwave link in, they kept losing connectivity....every time a bird flew through (and fried) in the wave....

  14. #14
    Registered User gazzak's Avatar
    Join Date
    Jun 2002
    Location
    London, England
    Posts
    3,595
    Quote Originally Posted by NooNoo
    Heh, a local college put a microwave link in, they kept losing connectivity....every time a bird flew through (and fried) in the wave....
    Did the canteen do cheap "chicken"?

Similar Threads

  1. stumped on internet sharing
    By buksida in forum Networking
    Replies: 10
    Last Post: July 13th, 2003, 06:27 AM
  2. [RESOLVED] 1.44 Floppy Stumped
    By Riverat in forum Hard Drive/IDE/SCSI Drivers
    Replies: 5
    Last Post: January 8th, 2002, 03:41 PM
  3. STUMPED AOPEN AX6BC
    By BC GREEN in forum BIOS/Motherboard Drivers
    Replies: 6
    Last Post: August 25th, 2001, 05:15 PM
  4. stumped on fatal OE and stuck in safe mode
    By turbo24 in forum Windows 95/98/98SE/ME
    Replies: 4
    Last Post: May 14th, 2001, 07:54 AM
  5. [RESOLVED] I Am Completely Stumped...
    By High*Ping*Drifter in forum Hard Drive/IDE/SCSI Drivers
    Replies: 4
    Last Post: March 4th, 2001, 07:57 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •