|
-
July 19th, 2001, 09:33 AM
#1
 Win98 Dual FIFO errors
I have this new Asus board Cubx-l and a 30gig drive.pc 133 ram.After win98 install I get the dual phifo error on the primary and secondary controller.I lost the cd rom as well.I wrote the batch file for the cdrom and tried to do the mobo drivers but to no avale.Any ideas as the system is working but still have the errors in device manager.I wasn't sure where to post this one as it could be part of several things.Sorry.... <IMG SRC="smilies/rolleyes.gif" border="0">
-
July 19th, 2001, 09:50 AM
#2
I am sorry about the spelling.
DUAL FIFO
-
July 19th, 2001, 10:31 AM
#3
Do you have the HDD and CD Rom on the same controller? If so, that might be it. Also it could be in the registry. Open up REGEDIT and hit F3, type NOIDE. When it finds it, there will be a value after it. Either 1 or 0. If it's 1, delete the NOIDE key and reboot, problem solved, if it says 0, and you have each drive on a separate IDE channel, then you have other issues. Possibly a bad controller or cable.
-
July 19th, 2001, 11:34 AM
#4
Different channels HD=IDE 0 CDROM=IDE1 <IMG SRC="smilies/confused.gif" border="0">
-
July 19th, 2001, 01:27 PM
#5
Did you check the registry?
-
July 19th, 2001, 08:27 PM
#6
Close topic:
Bad Fujisue drive.Thank you Chosen one!
-
July 19th, 2001, 10:30 PM
#7
I belive Chosen One was telling you to search the registry for "NOIDE". This is a common problem with older cd-roms, expecially after replacing them.
The Microsoft KB article is Q151911
-
July 19th, 2001, 10:41 PM
#8
Was the HD controller,the cd rom is new and the problem has been solved ,Thank you <IMG SRC="smilies/rolleyes.gif" border="0">
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
Bookmarks