[RESOLVED] 98 Crash due to 24X mitsumi

[Apallo]

All computers with a 24x cd have crashed on 98 setup. Any suggestions? It works fine if 95 is installed first but that is a pain.
Working off of a SIS 5577 Amibios board. Board prod number is GCT8STB

[This message has been edited by Apallo (edited 11-24-98).]

[Peter]

A little trick I have found to work with Win95 and Win98 loads. Fdisk, Format, Transfer command files to hard disk, copy mscdex.exe to hard drive, install CD-ROM Drivers, reboot. Create Win98 Directory, copy all files from Win98 Directory from CD to C:\Win98, install from there. Mitsumi, Cyberdrive and alike doesn't always like the CD-ROM drivers that come with Win98 boot disk. And after your done, if you wish, remove the drivers from config.sys. I leave them there incase I have to do some work in the DOS level. Have fun.

Peter

[ShadowRider]

You could also go to the Device Manager and look under the CD-ROM settings. If the DMA box is checked, uncheck it. This should take care of your problem.

[floyd fisher]

If the computer is "crashing" upon restart, you might want to try installing dos drivers (mscdex, et al.). This is a trick brought to you from the boys at microsoft.

[freddy]

another google find ,,,,,,,,,,,,,,,,,,,