|
-
December 5th, 2000, 08:14 AM
#1
[RESOLVED] PCI Steering
Does any one know how to disable PCI steering. Could save the life of my system! Thanks
-
December 5th, 2000, 09:34 AM
#2
Device manager, System devices, PCI bus, IRQ steering. Turn it off.
------------------
Who needs a life, I have Internet!
Jim & Sue's Free Files | Jim's Modems
-
January 17th, 2001, 11:44 PM
#3
Registered User
-
January 18th, 2001, 09:47 AM
#4
Go into BIOS setup, where it says "PnP OS Installed", change it to NO, change "Reset configuration data" to YES.
Restart, in safe mode, remove 3 or 4 devices from device manager (modem, sound card, and com ports usually works), go down to system devices, PCI bus, IRQ steering, disable.
Restart.
------------------
Who needs a life, I have Internet!
Jim & Sue's Free Files | Jim's Modems
-
January 18th, 2001, 11:05 PM
#5
<font face="Verdana, Arial, Helvetica, Verdana, Geneva, Arial" size="2">Originally posted by reboot:
Go into BIOS setup, where it says "PnP OS Installed", change it to NO, change "Reset configuration data" to YES.
Restart, in safe mode, remove 3 or 4 devices from device manager (modem, sound card, and com ports usually works), go down to system devices, PCI bus, IRQ steering, disable.
Restart.</font>
Also make sure you disable ACPI in the BIOS as well.
------------------
Bryan Pizzuti
CompTIA A+, CNAP
[email protected]
ICQ # 8525092
Yahoo Messenger: npaladin_2000
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks